Dang It
Thread Starter
11 Second Club
iTrader: (2)
Joined: Dec 2001
Posts: 1,297
Likes: 0
From: Upper Marlboro, MD
Dang It Last night was a new best for me, but could have been WAY better than it was.
1st
60'- 2.012
1/8- 8.247@88.69
1/4- 12.60@113.28
2nd
60'- 1.906
1/8- 8.144@88.86
1/4- 12.54@106.59 (completely missed 4th gear, just coasted through traps. Would have been my 12.3/12.4
)
3rd
60'-2.012
1/8- 8.318@87.45
1/4- 12.71@112
On this run my clutch was pretty heated up from the burnout (I need a line lock bad), and I slipped it a little too much off the line and could smell it by the end.
1st
60'- 2.012
1/8- 8.247@88.69
1/4- 12.60@113.28
2nd
60'- 1.906
1/8- 8.144@88.86
1/4- 12.54@106.59 (completely missed 4th gear, just coasted through traps. Would have been my 12.3/12.4
)3rd
60'-2.012
1/8- 8.318@87.45
1/4- 12.71@112
On this run my clutch was pretty heated up from the burnout (I need a line lock bad), and I slipped it a little too much off the line and could smell it by the end.
Thread Starter
11 Second Club
iTrader: (2)
Joined: Dec 2001
Posts: 1,297
Likes: 0
From: Upper Marlboro, MD
oh btw, car is a 2001 Z28, 6speed, B1 cam with MAC headers, lid, pulley, cutout, and stock 10bolt with 3.42's.
Best MPH prior to last night was 115.23, dont know why it was down 2mph last night.
Best MPH prior to last night was 115.23, dont know why it was down 2mph last night.
12 Second Club
Joined: Sep 2002
Posts: 547
Likes: 0
From: Minnesota
You could try a different clutch, I went from 2.1 60fts with nittos and a stock cluch, down to 1.8 60ft times with a spec stage 3 and the same nittos. Just a thought. and yes I am on the stock 10bolt with 3.42 gears.
Dan
Dan
