Come on, make a prediction !!!
Thread Starter
10 Second Sleeper Club
iTrader: (4)
Joined: Aug 2005
Posts: 237
Likes: 0
From: Victoria, Texas
Come on, make a prediction !!! Just added the following to the car about two weeks ago:
Comp cam 232/234 595/598 114 degree LSA with custom ground 4 degree advance
PRC Double Springs
Titanium Retainers
Valve Seats
Chromoly push rods
Did the following free mods as well:
AIR delete
EGR delete
Also replaced the PCV system with new one cause the rear coupling hose behind the engine on the old one was almost melted through and was broken.
Best time in sig with pre cam mods. What do ya'll think ill run?
Comp cam 232/234 595/598 114 degree LSA with custom ground 4 degree advance
PRC Double Springs
Titanium Retainers
Valve Seats
Chromoly push rods
Did the following free mods as well:
AIR delete
EGR delete
Also replaced the PCV system with new one cause the rear coupling hose behind the engine on the old one was almost melted through and was broken.
Best time in sig with pre cam mods. What do ya'll think ill run?
Thread Starter
10 Second Sleeper Club
iTrader: (4)
Joined: Aug 2005
Posts: 237
Likes: 0
From: Victoria, Texas
Car ran 12.70 with 60 ft of 1.9 with Auto tranny before the cam, springs install and EGR/AIR delete. Did not know at the time we ran that time that there was a vacuum leak. Fixed that!
Have not run it yet but will before end of the month!
Have not run it yet but will before end of the month!
