330.2 rwhp = 12's ?
Thread Starter
Launching!
Joined: Jun 2007
Posts: 274
Likes: 0
From: auburn, california
330.2 rwhp = 12's ? 
ive got a 2000 z28 it dynoed 330.2 rwhp you guys think itl break 12's in oh say 90 degree weather zero humidity? 10 inches of TOYO , its an A4 but i can bump the firmness with my tuner Trending Topics
TECH Enthusiast
Joined: Oct 2005
Posts: 595
Likes: 0
From: Miami, FL
with 330 rwhp I would say you have a chance if you get good traction.
I trapped 103 with 271+lid, my 60' sucked though. If you make a good 60', and you really have 40-50 more hp than me you shouldn't have a problem.
BTW, I wouldn't go cammin in just yet. Get a torque converter, it'll be cheaper, and it'll make a bigger difference.
I trapped 103 with 271+lid, my 60' sucked though. If you make a good 60', and you really have 40-50 more hp than me you shouldn't have a problem.
BTW, I wouldn't go cammin in just yet. Get a torque converter, it'll be cheaper, and it'll make a bigger difference.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by mpe488
BTW, I wouldn't go cammin in just yet. Get a torque converter, it'll be cheaper, and it'll make a bigger difference.
I went 13.5 @ 103, 2.0 60' in the FL heat stock w/ lid.
Added a 4000 stall converter and some sticky tires and I went 12.5 @ 106, 1.69 60'. 100 shot and I went 11.5 @ 114, 1.52 60'. This was on stock ws-6 exhaust too!
See sig for current mods and times.
BTW, the dyno says I make 295 rwhp n/a
I def am not in the worst environment, my car did 323hp/333tq and i got a 12.86@111mph.
Traction was good with mt radials and it's a M6. If you get a good launch i think you could see 12s temp will be a big factor however.
GL and post results! Only one real way to tell if it'll get 12s
William
Traction was good with mt radials and it's a M6. If you get a good launch i think you could see 12s temp will be a big factor however.
GL and post results! Only one real way to tell if it'll get 12s
William
Thread Starter
Launching!
Joined: Jun 2007
Posts: 274
Likes: 0
From: auburn, california
camscam02 you are right on the money , i checked the sheet and that is exacly were he had it dynoed at force fed. that sucks though, what do you think its realy puttin down?
in 70 degree weather which was quite humid, my friend drove his 2000 Z28 M6 with lid and catback to 13.13 @ 106 with a 2.0xx 60 foot. Same day, my other friend drove is 2000 Z28 A4 with catback to 13.2xxx with a high 2.0 60 foot on stock tires (yes stock tires car only has less than 20k miles)...i think low low 13's is where you will be at
