finally into solid 12's
i was running 315 nittos at 22 psi, heat them up with a brakestand for about 4-6 seconds, you want them to smoke at least thats what i kept hearing so i did it and it seemed to work. im still on the stock 10 bolt, so while i wasnt spinning much, i wasnt launching like i could with a real rearend and some slicks, but o well. stock 3.42 gears and just slipping it a bit from like 3,500-4,000 and it would bite, i laid all the way into it.
2nd gear, i flipped the nitrous switch and the WOT switch and window switch took over for me.
was spraying 125 shot. other mods are a 224/224 cam, supporting valvetrain and then long tubes, ORY, catback, ram clutch and the basic bolt ons.
dynoed 326 on a dynojet.
i think i could have hit a high 12 without the nitrous, all though i woulda taken all night to work that launch perfectly.
here were my 4 runs in the order i went...
13.6 @ 106 w/ 2.2 60' - no spray shakedown
12.9 @ 115 w/ 2.1 60' - shakedown run on spray
12.5 @ 117 w/ 2.0 60' - best run
12.5 @ 117 w/ 2.0 60' - hit it again, pretty consistent but i gotta launch better
the kid is a hacked togetehr version of the Nitrous Works wet plate kit that mounts behind the throttle body. its got NX iceman solenoids and a bunch of other accesories from all the other good places, i think theyre sponsors on here. harris speed, dynotune and nitrous outlet.

