12 Second Club In the 12s yet? Come inside!

in the 12's

Thread Tools
 
Search this Thread
 
Old 03-21-2008, 03:58 PM
  #1  
TECH Resident
Thread Starter
iTrader: (23)
 
3rdgentug's Avatar
 
Join Date: Jul 2005
Location: memphis, tennessee
Posts: 806
Likes: 0
Received 0 Likes on 0 Posts

Default in the 12's

got in the 12's last night w/ the new ride

air wasnt that great at 66* and 62% humidity, dont know the alt but its memphis motorsports park

these times were on street tires with the new list in sig, i was hoping for better but after only a few runs the tranny blew out

r/t .111
60 2.252
330 5.882
1/8 8.639
mph 90.06
1000 10.892
1/4 12.871
mph 113.99

( on this run it bumped the rev limiter into 3rd, but it was my best run of the night)

so almost a 114 trap, very awful 60's even for street tires, that made my 1/8th miles very bad. car really shines on the top end though to make up for it. on my last run i had better times then above got a lil lower 60ft of 2.199 or something and 8th mile was like 8.5xx or 8.4 xx but didnt keep the slip so i forgot the exact times. tranny gave out right after the 1/8 mile readings

the car was just built and needed some fine tuning, bumped the limiter into 3rd, didnt hold 1st long enough and on 1 run went into 4th right befor the 1/4 mile. i know on street tires if everything had gone right id have seen 12.6 or 12.5

but in the 12's so mods please change my undersig
Old 03-21-2008, 04:03 PM
  #2  
11 Second Club
iTrader: (32)
 
jetlag's Avatar
 
Join Date: Jan 2006
Location: Southaven, MS (near Memphis, TN)
Posts: 3,701
Likes: 0
Received 2 Likes on 2 Posts

Default

Were you in that Silver Z with stripes and Z06 wheels? If so, I saw it!
Old 03-21-2008, 04:58 PM
  #3  
11 Second Club
iTrader: (6)
 
slowmofo's Avatar
 
Join Date: Oct 2004
Location: Melbourne, Florida
Posts: 1,906
Likes: 0
Received 1 Like on 1 Post

Default

alot left in her, some tire and you should be in the 11's
Old 03-24-2008, 05:43 PM
  #4  
11 Second Club
iTrader: (8)
 
Atver300's Avatar
 
Join Date: May 2007
Location: Memfrica, TN
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts

Default

I ran out at Memphis on saturday engine is stock even the factory lid, ive got full length headers true duals over the axel with single chambers 3500 stall lca's and brackets pan hard bar sfc's and 275 17" mt ET streets and a 3.42 gear.
60' 1.634
330 4.986
1/8 7.835
mph 85.49
1000' 10.319
1/4 12.424
mph 106.85
Old 03-27-2008, 11:37 AM
  #5  
TECH Addict
iTrader: (7)
 
PewterScreaminMach's Avatar
 
Join Date: Sep 2006
Location: Austin, TX
Posts: 2,628
Likes: 0
Received 2 Likes on 2 Posts

Default

Nice runs.




All times are GMT -5. The time now is 05:59 AM.