Anybody know of a short 3/8in fuel line connector w/male to male ends?
Anybody know of a short 3/8in fuel line connector w/male to male ends? I will be using an Impala tank and the corvette fuel filter/FPR, w/single line to the front. I was thinking of having a guy fab up some custom nylon lines and everything is good w/the exception of all his connectors will be female and the output of the corvette FPR is also female. I need a short section of male-male fuel line to connect this, just like this one but short.
http://www.jegs.com/i/Dorman+Product...0-155/10002/-1
Anybody know of a source for something like this?
http://www.jegs.com/i/Dorman+Product...0-155/10002/-1
Anybody know of a source for something like this?
Any concern that the filter sitting down stream the fpr would have a pressure drop that would affect engine operation?
Launching!
Joined: Oct 2009
Posts: 235
Likes: 0
I used this http://www.summitracing.com/parts/RUS-640940/ and combined it with a barbed hose end AN fitting.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Take that Dorman 800-155 part, cut some of the length out of the middle of it, flare both sides and connect them using a 3/8" brass union. You can get the union at any auto parts store. I did this to put that end on my existing 3/8 fuel line and it works great. The union supports WAY more than the 100 psi your fuel system would ever put out. I also did the same thing to splice 2 power steering hoses together at the hardline. for my LS swap.
Well, I got a little connector which should work fine. Paid $12 to a guy on ebay. Probably easy to make if have the right tool, but not worth it to buy the tool for one connector. If anyone else needs one like this, his email is nickelson79@yahoo.com
Thanks to other offers above.
Pics below.
Thanks to other offers above.
Pics below.
Man I just saw this, I have one of those Mastercool flaring kits and I could have made oyu whatever you wanted. If you need something else let me know I probably live less than 50 miles from you.
I searched for '02 Camaro and '05 Impala and couldn't come up with that. Since I'm running a return line, I don't need the 'Vette FPR/Filter setup. A filter with quick connects on both ends would work for me. Anyone know what application uses that setup?