Does anyone use Nordskog digital gauges?
Thread Starter
TECH Junkie
iTrader: (3)
Joined: Nov 2001
Posts: 3,078
Likes: 1
From: Republic of Texas
Does anyone use Nordskog digital gauges? I am going to get a 3 gauge pod and am thinking of getting the Nordskog gauges. The red lights will match all the factory stuff and look pretty cool. Plus, they have an a/f gauge for $30. I would like to know if they are accurate? BTW, don't say "AutoMeter" <img src="gr_stretch.gif" border="0"> I have issues with them.
Launching!
Joined: Nov 2001
Posts: 200
Likes: 0
From: Walled Lake, MI
Re: Does anyone use Nordskog digital gauges? sorry, not what your looking for. but, what issue's do you have with autometer?? i was thinking about getting some gauges from them, but if there is a reason i shouldnt i'd really like to know!! thanks
Ryan
Ryan
Thread Starter
TECH Junkie
iTrader: (3)
Joined: Nov 2001
Posts: 3,078
Likes: 1
From: Republic of Texas
Re: Does anyone use Nordskog digital gauges? Well, I verified on atap that my AutoMeter tach is always at least 200rpm's too high. Under 1000rpm's the needle shakes so bad you can't get a reading. And, yes, I cut the correct wires.
TECH Fanatic
Joined: Nov 2001
Posts: 1,190
Likes: 0
From: Las Cruces, NM
Re: Does anyone use Nordskog digital gauges? I have there 16 psi boost gauge and 100 psi fuel pressure gauge. Can not say how accurate they are because I have hooked them up yet. They may be a little slow responding from what I hear.
Gary
Gary
Re: Does anyone use Nordskog digital gauges? I've got their electric fuel pressure gauge & sending unit (to 100 PSI) in my '94. The thing is a piece of crap. The connector at the sending unit is always shaking around and causes the gauge to 'freak out' all the time. I can't keep a stable reading out of it.
I'm probably going to solder the wires to the sending unit to make it work, and do away with the connector.
My '98 will get an Autometer full sweep.
-Andrew
I'm probably going to solder the wires to the sending unit to make it work, and do away with the connector.
My '98 will get an Autometer full sweep.
-Andrew
