Engine bay update! need some advice too!
Brake Fluid Res. Cover - ours has larger skirts than the other ones on the market, and it wraps around the sensor on the side as seen in the 2nd picture
http://www.emblempros.com/inc/sdetail/600
Fuse covers with black etched diagrams:
http://www.emblempros.com/inc/sdetail/601
Stainless Steel engine bay label kits to replace the ugly factory stickers:
http://www.emblempros.com/inc/sdetail/652
I like to call this "The Bat-Wing":
http://www.emblempros.com/inc/sdetail/796
Remember, emblempros.com uses 18GA mirror stainless steel, which is thicker than any number higher than that. The lower the GA, the thicker the metal. We are among the thickest metal users in this field. We also laser cut all of our stainless for sharp, crisp edges.
http://www.emblempros.com/inc/sdetail/600
Fuse covers with black etched diagrams:
http://www.emblempros.com/inc/sdetail/601
Stainless Steel engine bay label kits to replace the ugly factory stickers:
http://www.emblempros.com/inc/sdetail/652
I like to call this "The Bat-Wing":
http://www.emblempros.com/inc/sdetail/796
Remember, emblempros.com uses 18GA mirror stainless steel, which is thicker than any number higher than that. The lower the GA, the thicker the metal. We are among the thickest metal users in this field. We also laser cut all of our stainless for sharp, crisp edges.
Last edited by dragonZ28; Feb 5, 2009 at 11:24 AM.
Looks good. Might I suggest one thing?
http://store.specializedstainless.co...et/Detail?no=7 -In brushed.
http://store.specializedstainless.co...et/Detail?no=7 -In brushed.
A couple companies make covers for the reservoir. Specialized Stainless has the boxey shaped ones. And I think Thunder Racing still has the left over stock of billet ones that MBA used to make, and those are quite nice, though about triple the cost of the Specialized Stainless ones.
I also think a couple of our brushed stainless covers would look at home in your engine bay.
I know pewter cars only have a base coat in the engine bay, looks like more of a tan. If you have the time, try painting your entire wheel wells with the same paint you used on the intake and lid. If you have any questions, please don't hesitate to ask. 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo yea same paint, but i tried a different clear and it sucks lol. i need to re-do the clear coat on it, it's not as shiny as the intake.
i think painting the wheel wells is a good idea, maybe when i have a free weekend to do it.
Thanks for the recommendations!!
I also think a couple of our brushed stainless covers would look at home in your engine bay. I know pewter cars only have a base coat in the engine bay, looks like more of a tan. If you have the time, try painting your entire wheel wells with the same paint you used on the intake and lid. If you have any questions, please don't hesitate to ask.
I also think a couple of our brushed stainless covers would look at home in your engine bay.
I know pewter cars only have a base coat in the engine bay, looks like more of a tan. If you have the time, try painting your entire wheel wells with the same paint you used on the intake and lid. If you have any questions, please don't hesitate to ask. 
THe woman in your sig is too fine??? hahaha
forgive me for being a tard 
I can never remember where is the bumper support on our cars, and what color was it orginally?
Where did you get the grommets for your wire mod? And what size did you use?
I can never remember where is the bumper support on our cars, and what color was it orginally?Where did you get the grommets for your wire mod? And what size did you use?
the bumper support is the black thing that has the 5 plastic clips holding the tip of the bumper. stock its some ugly greenish poo color lol. didn't get grommets yet, i have the wires protected with loom and tape though for now
