Side Splitters ready for sale...
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 4
From: Valley Village, CA
Side Splitters ready for sale... Here we go... My inspiration (hence the wavy line feature as opposed to just a straight edge) was the ZR1:
and Hennessey Camaro:
Without further adieu... (again, pics suck because it was dark but better than nothing, should get day light pics tomorrow):
I made it a little more wavy than the other cars to be a little different, look better than just a triangular piece of plastic, and because it actually goes with different breaks in our body (easier to see in person but I basically copied the design from the shadow the car casts). If you don't like it you can easily knock it down a little...
In the near future I will make canards for the front splitter and the side splitters (they go up on the body a little to channel air around the tires) which is another reason for the shape of the side splitters, I made them bulge out at the back a little to accentuate the canards that will come and to give it a finished look but so far so good
They mount with 5 self tapping bolts on each side and come with nylon spacers. They also have 1" of adjustability built in (to slide more under or out from the car).
Trying to keep the price at $275 shipped, $250 picked up but these f#ckers are LONG, lol! Not to mention I'm still waiting on a set in stone price from Jameel (the guy who gets the plastic and waterjets these for me).
HOWEVER, I'll offer LS1tech members $25 off, so if you want a set paypal $250 to madelisle@yahoo.com and you're good to go
Whenever I offer the canards (hopefully within a week or two) anyone who already ordered a splitter or side splitters (or both, lol) will get a sweet deal
and Hennessey Camaro:
Without further adieu... (again, pics suck because it was dark but better than nothing, should get day light pics tomorrow):
I made it a little more wavy than the other cars to be a little different, look better than just a triangular piece of plastic, and because it actually goes with different breaks in our body (easier to see in person but I basically copied the design from the shadow the car casts). If you don't like it you can easily knock it down a little...
In the near future I will make canards for the front splitter and the side splitters (they go up on the body a little to channel air around the tires) which is another reason for the shape of the side splitters, I made them bulge out at the back a little to accentuate the canards that will come and to give it a finished look but so far so good
They mount with 5 self tapping bolts on each side and come with nylon spacers. They also have 1" of adjustability built in (to slide more under or out from the car).
Trying to keep the price at $275 shipped, $250 picked up but these f#ckers are LONG, lol! Not to mention I'm still waiting on a set in stone price from Jameel (the guy who gets the plastic and waterjets these for me).
HOWEVER, I'll offer LS1tech members $25 off, so if you want a set paypal $250 to madelisle@yahoo.com and you're good to go
Whenever I offer the canards (hopefully within a week or two) anyone who already ordered a splitter or side splitters (or both, lol) will get a sweet deal
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 4
From: Valley Village, CA
There's no gap. The floor pan of the car dips up, the spacers are there to fill the gap so the splitter doesn't bow up but the splitter itself and any painted part touch each other with no gap...
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 4
From: Valley Village, CA
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 4
From: Valley Village, CA
It will look GREAT with the canards to make it more finished looking
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 4
From: Valley Village, CA
I'll give you the side ones for the prementioned discount AND if you buy the splitter at the same time I'll give it to you for the GP price of $275 so $525 shipped and I'll eat the paypal fees...
They will still ship separately due to dimensions though...
Thread Starter
Banned
iTrader: (56)
Joined: Jul 2004
Posts: 12,637
Likes: 4
From: Valley Village, CA
I have them so they are even with the tire that sticks out (that's the point of them and the canards, to direct air around the tires and reduce rolling resistance) but they are adjustable (can slide in or out)...
