First LT1 with side splitters
I'll say it again, It looks 100000000x better than it did on any of the Camaro's. From those pictures you can tell than the front splitter needs better shaping to match the front of an LT1 bird though. Like right before the front wheel it should curve out away from the car, not back under it.
To me that is the worst looking thing about it because it doesn't look like it was really made for these cars. Otherwise, it does look decent.
Most noticeable in this picture:
To me that is the worst looking thing about it because it doesn't look like it was really made for these cars. Otherwise, it does look decent.
Most noticeable in this picture:
I'll say it again, It looks 100000000x better than it did on any of the Camaro's. From those pictures you can tell than the front splitter needs better shaping to match the front of an LT1 bird though. Like right before the front wheel it should curve out away from the car, not back under it.
To me that is the worst looking thing about it because it doesn't look like it was really made for these cars. Otherwise, it does look decent.
Most noticeable in this picture:
To me that is the worst looking thing about it because it doesn't look like it was really made for these cars. Otherwise, it does look decent.
Most noticeable in this picture:
It would look weird (like the side splitter) to just go out to nothing, then people would HAVE to have canards for the front.
This way you can mod in this order and still look good at each step...
Front Splitter
Front Splitter + Canards
Front Splitter + Side Splitters + All Canards
Front Splitter + Side Splitters + All Canards + Fender Guards (mud flaps, coming soon, subtle to match canards, again like the ZL1).
The front splliter stays pretty flush all the way around, but then on the corners it just looks like it should come outward some instead of disappearing under the bumper. If it were to stay more flush it would match the side splliters perfectly.
And, what are canards? I must have read that 3,000 times in this thread and still don't have a clue.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
? Product Profile
MAR Forged 4th Gen Fbody Wheel Set - M5R
List Price: $3,199.00
Item Code: 484M5R
Categories: Custom Forged Wheels
Description
Price is per SET of FOUR wheels
The MARacing M5R is our custom forged 2-piece wheel. This serious and classic design is currently available for 4th generation Camaros and Firebirds.
- Front 18" x 9"
- Rear 18" x 10"
- Perfect offset for 4th generation Camaro and Firebirds
- Fully forged center and wheel hoop
- Incredibly strong 2-piece design
- Computer designed, CNC machined
- Comes with matching machined and O-ringed billet center caps
- Polished outer lip
- Price includes standard color powdercoated center
- Custom center finishes/colors available, please call
Notes: Lowered 4th gen f-bodies will need to roll rear fenders for safe and proper clearance.
Terms: A deposit of 50% of the total price is required, remaining amount due at time of shipment. All cancelled orders must be approved and are subject to cancellation fee. Approximately 6-8 weeks is required from time of deposit and order finalization to time of delivery. Price does not include shipping.
For more information and to start a custom wheel order, please contact us at (586) 294-4404
MAR Forged 4th Gen Fbody Wheel Set - M5R
List Price: $3,199.00
Item Code: 484M5R
Categories: Custom Forged Wheels
Description
Price is per SET of FOUR wheels
The MARacing M5R is our custom forged 2-piece wheel. This serious and classic design is currently available for 4th generation Camaros and Firebirds.
- Front 18" x 9"
- Rear 18" x 10"
- Perfect offset for 4th generation Camaro and Firebirds
- Fully forged center and wheel hoop
- Incredibly strong 2-piece design
- Computer designed, CNC machined
- Comes with matching machined and O-ringed billet center caps
- Polished outer lip
- Price includes standard color powdercoated center
- Custom center finishes/colors available, please call
Notes: Lowered 4th gen f-bodies will need to roll rear fenders for safe and proper clearance.
Terms: A deposit of 50% of the total price is required, remaining amount due at time of shipment. All cancelled orders must be approved and are subject to cancellation fee. Approximately 6-8 weeks is required from time of deposit and order finalization to time of delivery. Price does not include shipping.
For more information and to start a custom wheel order, please contact us at (586) 294-4404
I didn't want to post pics until after Monday (when I have side splitters on, canards powdercoated and on, car cleaned, etc... all for LA Invasion) but you guys have been waiting awhile so AS LONG AS you don't judge the finished LOOK by what you see in raw aluminum I'll keep these pics up...
Here's what the raw prototypes (still need side mounting screw holes) look like...
They will also have three holes to mount for the top part just still working on placement...
You can order them raw like this (cheapest option), powdercoated a black texture (to look like the ABS splitters) by me or I'll have a third option where I ship them straight to Sean (SilverGhost) to be powdered the color of your choice (some body colored pieces would look good
)... Still waiting on pricing though, have to find out how much material will cost (just cut these from scrap).
Here's the front Canard Prototypes on my car...
Since I know some people lack imaginiation I threw some black Gorilla Tape on there just to give you a better visual of the finished product...
I can't wait to get a chance to get it all on
Here's what the raw prototypes (still need side mounting screw holes) look like...
They will also have three holes to mount for the top part just still working on placement...
You can order them raw like this (cheapest option), powdercoated a black texture (to look like the ABS splitters) by me or I'll have a third option where I ship them straight to Sean (SilverGhost) to be powdered the color of your choice (some body colored pieces would look good
)... Still waiting on pricing though, have to find out how much material will cost (just cut these from scrap).Here's the front Canard Prototypes on my car...
Since I know some people lack imaginiation I threw some black Gorilla Tape on there just to give you a better visual of the finished product...
I can't wait to get a chance to get it all on