steering wheel swap
steering wheel swap I'm trying to figure out how to swap steering wheels between brands. Let's say something like a factory Subaru steering wheel into an f-body.
Is is just a matter of hubs matching and simple wiring? Do airbag wires have specific voltage to match? I don't want to make everything physically match up only to deploy an air bag on startup.
Is is just a matter of hubs matching and simple wiring? Do airbag wires have specific voltage to match? I don't want to make everything physically match up only to deploy an air bag on startup.
Last edited by imma_stocker; Oct 6, 2009 at 04:33 PM.
Nothing for interbrand swaps. How about within the same brand? Subaru and GM work together pretty closely but if that isn't enough I'll go 100% bowtie.
I'm looking for a thick wheel with a small radius, preferably 4 spokes.
I'm looking for a thick wheel with a small radius, preferably 4 spokes.
The splines on the shafts are completely different. You'll need to figure out how to adapt the shaft to the steering wheel (or vise versa). The airbag/radio controls won't work if it's a non-GM (f-body/early grand am/truck) wheel.
