Duplicolor FTW (engine bay)
#24
On The Tree
iTrader: (4)
Join Date: Mar 2009
Location: South Mississippi
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
I believe he told me jewlery cleaner or some **** like that last time when I was talking to him. Alex is the type of guy you would like to drop your car off with him for a month because he has a natural tendancy to modify things to make the smallest differences.
#27
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2008
Location: Hendersonville TN
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys.
The fuel rails were easier than I thought they would be. I started by folding up 1000 grit wet paper, wetting it, and running it over the tube from side to side. Turns out, all I had to do was get a piece of cloth with some aluminum polish/jeweler's rouge and use the same method as the paper. I really couldn't believe the outcome myself but it works.
The fuel rails were easier than I thought they would be. I started by folding up 1000 grit wet paper, wetting it, and running it over the tube from side to side. Turns out, all I had to do was get a piece of cloth with some aluminum polish/jeweler's rouge and use the same method as the paper. I really couldn't believe the outcome myself but it works.
#29
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2008
Location: Hendersonville TN
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Well I finished the color coats and clear coats today so I decided to wet sand and buff it out. I swear this is Duplicolor out of a spray can and not the factory color. I couldn't be happier with how it turned out. Enjoy.
#33
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2008
Location: Hendersonville TN
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
Here is a shot of the intake in place as well as the same valve covers painted black. I have new covers coming that have the stock oil splash covers in place so I can take the catch can off. I plan on milling the un-necessary coil bracket bosses off and filling the holes but I don't know about the black yet. What do you guys think?
#34
did you paint the firewall? how did you paint the bottom psg side where the ac condenser line goes through? did u remove the ac condenser and the brake reservoir?I'm looking into doing this soon. i just want to get as much info as i can before i do.thx.
#39
11 Second Club
Thread Starter
iTrader: (14)
Join Date: Aug 2008
Location: Hendersonville TN
Posts: 444
Likes: 0
Received 0 Likes
on
0 Posts
I didn't do the firewall. For the most part, you don't see that area in the daylight. Honestly, the only time I have noticed it is in the pics with the flash on.
Don't get me wrong, I would love to take the engine out one day and go to town in there but for now, this will have to do.
Don't get me wrong, I would love to take the engine out one day and go to town in there but for now, this will have to do.