Blingmaster FTL
Thread Starter
12 Second Club
iTrader: (7)
Joined: Feb 2009
Posts: 1,138
Likes: 2
From: Havelock, NC
I agree with the Mother's being proven. That stuff is a nice thick creme that WORKS. I work at a parts store and we had a silver NOS Sneaky Pete bottle. I sanded it down and used Mother's right off our shelf and it looks chrome. Funny, the $5 polish works great right off the shelf by hand or machine.
Thread Starter
12 Second Club
iTrader: (7)
Joined: Feb 2009
Posts: 1,138
Likes: 2
From: Havelock, NC
Yeah it was well-shaken. I loaned it out to 2 different friends who aren't noobs when it comes to polishing and let several others try it at my place and my bottle just does not perform.
I sent you a PM with the owners/developer's number...give him a call and discuss your issues with him. I know the vast majority of users are very pleased with the product and I know he is interested in learning why you are not. Talk with him directly and see what yall can work out to make you happy. Blingmaster is a small company that relies on word of mouth and recommendations from enthusiast to enthusiast to get by unlike the larger companies...so a thread bashing them hurts them much more than their larger competitors. Too many people like me swear by the product for it not to be good....so call David and speak with him and see if yall can figure out what's wrong....if its your doing something wrong, if the product is just not what you were expecting, if you "got a bad batch" or whatever it is. I know he would like to try to make you happy, and I don't think you can expect anymore than that from a company.
Thread Starter
12 Second Club
iTrader: (7)
Joined: Feb 2009
Posts: 1,138
Likes: 2
From: Havelock, NC
Will-do. Thanks for that contact information. I'll try to call him tomorrow but in the mean-time if you talk to David if you can convey the info I sent you in the PM I would be much-appreciative. Thanks again,
Josh.
Josh.
Thread Starter
12 Second Club
iTrader: (7)
Joined: Feb 2009
Posts: 1,138
Likes: 2
From: Havelock, NC
I've had this stuff since February and used it quite a bit on different metals and methods of application. I wasn't trying to 'bash' Blingmaster, just wanted to gauge everyone else's experiences with it and share mine. There are tons of people who don't like Texas Speed products and tons more who swear by them, and the same with Thunder Racing, and any other company. A negative experience shouldn't break a company but make them better by knowing any complaints. 
i bought that blingmaster stuff after hearing all the hype about it too... i also didnt have any luck with it... i got it for my ccw's... not as good of a shine i was looking for... i then decided to try mothers billet polish, and had better sucess with the mothers!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I'm assuming that you all that are having bad luck are using too much product. The product is non abrasive, so if you apply too much, it will not alllow the applicator (which is doing the cutting) to do what it needs because too much polish is in the way. I have sampled this stuff....and was impressed. A LITTLE goes a LONG ways. When Polishing metal, the applicator shoiuld not glide across the surface, you should somewhat be able to "feel" it working, if that makes sense.
Thread Starter
12 Second Club
iTrader: (7)
Joined: Feb 2009
Posts: 1,138
Likes: 2
From: Havelock, NC
I'm assuming that you all that are having bad luck are using too much product. The product is non abrasive, so if you apply too much, it will not alllow the applicator (which is doing the cutting) to do what it needs because too much polish is in the way. I have sampled this stuff....and was impressed. A LITTLE goes a LONG ways. When Polishing metal, the applicator shoiuld not glide across the surface, you should somewhat be able to "feel" it working, if that makes sense.
