Question about 335's
Thread Starter
On The Tree
Joined: Mar 2002
Posts: 118
Likes: 0
From: Houston
Question about 335's I just got a set of grandsport rims for my camaro with 335/35/17 tires on the back. In order for the rims to fit I had to bang in the inner fender. The rims cleared the inside but were close. So just to be safe I put 1/4 inch spacers in between them. They don't rub at all. I was wondering if anyone else has used these tires without spacers ? Did they rub? Thanks in advance.
TECH Addict
Joined: Dec 2001
Posts: 2,850
Likes: 0
From: Plainville,MA
Re: Question about 335's Did the tire and rim combo work after inner fender mod without the spacer, or did U "need" the spacer ? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
Thread Starter
On The Tree
Joined: Mar 2002
Posts: 118
Likes: 0
From: Houston
Re: Question about 335's It cleared the inner fender, but I wasn't sure if it would rub going around a corner or a steep driveway, so I put them in. It might have worked without them, but not sure. I didn't try.
TECH Addict
Joined: Dec 2001
Posts: 2,850
Likes: 0
From: Plainville,MA
Re: Question about 335's What I found with my 315's was all tire rub was eliminated with the installation of a BMR adjustable panhard rod ! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I was able to center the rearend perfectly and the ends are rod ends so there is no bushing to flex or give ! <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
If U put one of these in U may not need spacers !
I am not a big fan of spacers to begin with !
In the Spring I plan on upgrading to 335's myself !
I was able to center the rearend perfectly and the ends are rod ends so there is no bushing to flex or give ! <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
If U put one of these in U may not need spacers !
I am not a big fan of spacers to begin with !
In the Spring I plan on upgrading to 335's myself !
