Dashboard cover users inside please
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Oct 2003
Posts: 1,645
Likes: 0
From: Kaneohe, Hawaii
Dashboard cover users inside please I've got a dash cover but I didn't want to put that taped velcro because of what someone told me that the sticky part will melt and leave a mess on my dash. However, I drive a lot with my t-tops down, and at times, the wind will blow my dash cover up. Or even from a stop, when I gas it, it slides off and into my lap.
I'm wondering what you guys use, any suggestions?
I'm wondering what you guys use, any suggestions?
Staging Lane
Joined: Aug 2003
Posts: 62
Likes: 0
I use a dashboard cover w/o the velcro. When I'm cruising around town, it keeps still. Haven't had any problems with it falling into my lap unless I gun it from a stop, but I've done that only once (I'm not a hard driver.) If I've got the t-tops out, I just take the cover off and put it in the back.
Teching In
Joined: Dec 2001
Posts: 387
Likes: 0
From: Southern IN, USA
Have one, and I took it from my traded in 1998 - used my own Velcro bases with contact cement - they pulled right up with a bit of effort and some Isopropyl alcohol removed any residue. I only did the PS part closest to the A pillar, and one dot on the SRS cover, and one on the DS.
Photos in "modifications" section of page - see sig.
Photos in "modifications" section of page - see sig.
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Oct 2003
Posts: 1,645
Likes: 0
From: Kaneohe, Hawaii
Originally Posted by LordFlux
If I've got the t-tops out, I just take the cover off and put it in the back.
I'd do that, although I've got a nice embroidery of a Phoenix and a caption of FENIX SS on that's pretty visible from outside the car.
Thread Starter
TECH Fanatic
iTrader: (3)
Joined: Oct 2003
Posts: 1,645
Likes: 0
From: Kaneohe, Hawaii
Originally Posted by emarkay
Have one, and I took it from my traded in 1998 - used my own Velcro bases with contact cement - they pulled right up with a bit of effort and some Isopropyl alcohol removed any residue. I only did the PS part closest to the A pillar, and one dot on the SRS cover, and one on the DS.
Photos in "modifications" section of page - see sig.
Photos in "modifications" section of page - see sig.
TECH Fanatic
Joined: Dec 2001
Posts: 1,081
Likes: 0
From: Dallas TX (Oak Cliff)
Where is my tracking numer, you said you were going to ship them last Monday. I am still waiting for my floor mats. 
Originally Posted by FenixSS
I've got a dash cover but I didn't want to put that taped velcro because of what someone told me that the sticky part will melt and leave a mess on my dash. However, I drive a lot with my t-tops down, and at times, the wind will blow my dash cover up. Or even from a stop, when I gas it, it slides off and into my lap.
I'm wondering what you guys use, any suggestions?
I'm wondering what you guys use, any suggestions?
