Detail: Nissan Altima
The whole car had some pretty bad water etching along with the normal marring/swirls. I didn't take many before pics but it came out great.
APC+ diluted and used on the wheel wells, wheels/tires.
The whole car was done with a black LCC pad and M205 minus a few heavy areas. The clear really reacted well to this and I was pleased with the results.
For the heavy scratch you see, I stepped it up to a LCC purple hybrid foam/wool pad and M105 followed by an LCC orange pad and the new Optimum Hyper Compound Spray then followed by an LCC black pad and M205. There is a very minor section that is past the clear and would need to be wetsanded to fade it out a little more.
It was polished using SFX's line along with their wax. Tires and trim were dressed with SFX'x dressing and the wheel wells were dressed with Meguiars Natural Shine.
Masked off


Before:

After:

Scratch before

1st pass

Finished

2nd shot

Few real sun light shots:






Thanks for checking it out.


