Film on window, what to use to get it off?
01-18-2003, 01:21 PM
#1
Junior High Director
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: OC, CA
Posts: 597
Likes: 0
Received 0 Likes
on
0 Posts
Film on window, what to use to get it off? I have this film of something on my window (not sure what it is), what can I use to get it off...I have no tint so that's not an issue...any help is appreciated...
Thanks,
Joe
Thanks,
Joe
01-19-2003, 05:07 AM
#3
Re: Film on window, what to use to get it off? Another idea is use gas, dampen a rag or towel in the gas and be careful of the stripping at the bottom of window.You dont want that stripping to soak up the gas, otherwise it will dry it out and the stripping will start to crack. Also try using a bug and tar remover.
01-19-2003, 09:02 AM
#4
Teching In
Join Date: Nov 2002
Location: Texas
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Re: Film on window, what to use to get it off? I used acetone and a pfofessional razorblade scraper, still was a lot of work. The acetone will soften up the tint. Besure to do outside with the doors open for good ventilation or you will be high as a Geogia pine. I bought my acetone at the Sherwin-Williams paint store
01-19-2003, 10:33 AM
#5
TECH Junkie
iTrader: (1)
Join Date: Sep 2002
Location: Conroe, TX
Posts: 3,080
Likes: 0
Received 0 Likes
on
0 Posts
Re: Film on window, what to use to get it off? We use this stuff called Prepsall (or so it sounds, might be spelled Prepsol) @ work. Removes all kinds of sticker residue off anything. another thing that helps someone for lightly placed stuff, is just saturating it w/ windex, then taking a razor and tryin to scrape it off