awe yeah! 'new' taillights
its a sticker kit that allows you to paint the grid pattern from the outside of the light so that you don't see the separating original. Should look really nice when its done. Mine were still together but they were scratched up and dirty inside so I took them apart and sanded/polished them.
Thread Starter
Joined: Nov 2005
Posts: 1,933
Likes: 4
From: Central Texas
http://www.f-bodyvinyl.com/index.php
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
Joined: Nov 2005
Posts: 1,933
Likes: 4
From: Central Texas
sorry it took so long but I finally started this past weekend
vinyl applied and pics with just VHT - I'm going to let it cure a while before prepping and clearing... the last coat of VHT went dry and left a matte finish which I kinda like... opinions?
vinyl applied and pics with just VHT - I'm going to let it cure a while before prepping and clearing... the last coat of VHT went dry and left a matte finish which I kinda like... opinions?
http://www.bfranker.badz28.com/vinyl/vinyl.htm
that's the link I've always used for Brent's stuff. He's got a TON of product on there and will probably do just about anything custom.
For those that haven't used him here's a fun story of how awesome he is. I ordered the CAMARO inlay for the rear panel in reflective silver. He shipped them out and I promptly installed them. During my install I ruined the second "A". I emailed him asking for a new "A" to match. He told me I got the LAST inlay set from that vinyl manufacturer and the colors wouldn't match. I agreed to just buy a new set. He kindly sent me a completely new set from the new manufacturer FREE OF CHARGE!!! Yes, he is indeed awesome. And he will get all of my future vinyl business.
that's the link I've always used for Brent's stuff. He's got a TON of product on there and will probably do just about anything custom.
For those that haven't used him here's a fun story of how awesome he is. I ordered the CAMARO inlay for the rear panel in reflective silver. He shipped them out and I promptly installed them. During my install I ruined the second "A". I emailed him asking for a new "A" to match. He told me I got the LAST inlay set from that vinyl manufacturer and the colors wouldn't match. I agreed to just buy a new set. He kindly sent me a completely new set from the new manufacturer FREE OF CHARGE!!! Yes, he is indeed awesome. And he will get all of my future vinyl business.
Thread Starter
Joined: Nov 2005
Posts: 1,933
Likes: 4
From: Central Texas
still working on the center piece - instead of the 'Trans Am' lettering and bird, I'm going to use a small USMC EGA, VHT over it lightly, and use the same matte clear
I picked up some 3457 bulbs from a non-sponsor that are guaranteed longer life, brighter, and cooler than other 3157 bulbs... I'll also be opening up the outer holes to accept 3157 sockets
here's after curing... may wet sand and spray a few more coats of clear
I picked up some 3457 bulbs from a non-sponsor that are guaranteed longer life, brighter, and cooler than other 3157 bulbs... I'll also be opening up the outer holes to accept 3157 sockets
here's after curing... may wet sand and spray a few more coats of clear
