Shuckman00

Those look great and I just ordered red ones for mine. I have been looking for these as I had a set on my old 97 and have been having a hard time finding them.

Thanks

2002ArticWhiteSS

iTrader: (4)

No prob man! You will love them!

Majestic9C1

iTrader: (19)

I picked up a SLP grille off here that said SS and I covered the SS up with a badge from a Chevy Cobalt.

TallgeeseIV

iTrader: (1)

A few of these have already been posted by other people, but here goes:

Speaker fabric covered speaker grilles


Clear front side markers and amber led's, matching turn signal amber led's


Ashtray switch bezel, made by me (it's not actually screwed into the car. I used drywall anchors on the other side to hold it in place but allow me to pull it out, just like the stock ashtray)


Camaro dimmer wheel and export Camaro black headlight ****


Camaro black steering wheel controls


Red gauge needles


Full red LED interior, including red led footwell courtesy lighting


Black front bumper support cover, made by me


Black battery cover, fuse box covers, as well as two tone black/yellow wire covers, please excuse how dirty it is. Winter had just ended. (cheap plastic ones, I know, I know...)

Tipnitty

iTrader: (3)

I'm getting ready to do some LED's on my car. Where did you get the light up plate for the stereo?

TallgeeseIV

iTrader: (1)

Uh, can't link to non sponsors, but google "humount" or "maptechenterprises"

Tipnitty

iTrader: (3)

Awesome, appreciated it. Kept finding dead links when I would do searches.

01badbird

Nice stuff heres some of mine
reworked fuel door, took off finger notch and now has lever next to seat to open it (lever for rear hatch also)
Cut up the side mirrors sorry wish I had better pics

made a nitrous/fuel gauge pod kinda like the old hood tachs but on cowl Honeycomb overlays on sidemarkers Lit rear and front center pieces Lighted nitrous purge and underhood lighting for night showing the underhood lights was left on and the red burst is actvated on purge Put in some switches to turn on/off interior lights (so doors can be left open) and daytime running lights (also have switch in another location to control power antenna,put down when playing cds etc.) Also had switchplate made up for tcs plate and also can control radiator fans trans cooler fan and tcs main power (no more getting in and turning off) different shifter handle with linelock switch and nitrous controls in ashtray and if you look close on side of console up front red thing is ant. switch Cut down center caps on the welds one is stock and one is cutdown (not set in all the way tho) bunch of other stuff underhood that I will have to put up but this is some other lil touches

SnakeEaterSS

Some subtle touches...couple of EmblemPro goodies and my Speed Dawg ****. Love the way they look...

Nice stuff in here everyone, keep it coming!


[IMG][/IMG]

[IMG][/IMG]

JDEP162

at 01BadBird-
any details on that cowl pod gauge setup?
i had wanted to do this and cud only find a couple examples, cud u share how u made it work, maybe more pics?

02TransAm/Batmobile

iTrader: (32)

Nice to see this thread dug back up to life. Here's something I added - Lynx Stripes.



Since I've taken this shot, I added EmblemPros' stainless steel "Ram Air" emblems in overlap section of the stripes and removed the vinyl "Ram Air" near the nostrils.

01badbird

made it myself and used 2 rattle can plastic tops to start with and is tapped into both lines recently put led on it so when nitrous is turned on I see it right in front of me. also mounted so needles should be straight up when in use.

Pewter T/A 2000

God dammit, 01badbird, I love your car. I've felt this way for awhile, but I had to come out with it. There's so many little touches to it that you're not even pointing out.

01badbird

THANKS! appreciate it ! Heres a pic of battery cutoff in rear plate and and chrome/black stripes to match emblempros stainless/black badges/emblems (also have race vid of first pic if interested) will put up some of underhood soon! Grandson with me in car for his first 109mph pass (no nitrous in car)

Shuckman00

Thanks to 2002ArticWhiteSS I was able to find some high quality acrylic letters for the front and rear "camaro" to add a nice little touch.

BLOODTA

iTrader: (19)

My LOTB badges

totalchaos

iTrader: (5)

I need one of those.

LPE 403

iTrader: (6)

I might have a handful made and sell them. I know you're not the only one

2002ArticWhiteSS

iTrader: (4)

Looks great man! Glad I could help you out! Emblem pros makes some high quality stuff

2000 WS6 Formula