Relocation of all electricals question...
Relocation of all electricals question... I'm in the process of relocating my battery to trunk, additionally I have removed all HVAC components including; A/C, Evap. Box, heater core, etc... However, there still this very fuggly wiring through the engine bay.
I've thought about just runnning the wire under the passenger side fender but still there's much uglyness on the driver side of the bay with the fuse boxes/wiring. That said, with all my new found space under the dash I'm thinking about relocating all my electircals;including PCM and fuse boxes to under the dash...and feed only the neccessary wires needed into the engine bay for: MAF, FI, EWP, Starter, and misc.
Has anyone ever done this? If so...I would appreciate a few pointers/pics...
Thanks,
Ron
I've thought about just runnning the wire under the passenger side fender but still there's much uglyness on the driver side of the bay with the fuse boxes/wiring. That said, with all my new found space under the dash I'm thinking about relocating all my electircals;including PCM and fuse boxes to under the dash...and feed only the neccessary wires needed into the engine bay for: MAF, FI, EWP, Starter, and misc.
Has anyone ever done this? If so...I would appreciate a few pointers/pics...
Thanks,
Ron
I dont think so.. the most done ive seen is to re-route the passengers side wire loom inside the right side fender void..
Moving the fuse box would be a HUGE project as all the wires would have to be lengthened and re-run.. not imposible though..
Moving the fuse box would be a HUGE project as all the wires would have to be lengthened and re-run.. not imposible though..
