Wire Mod with a twist
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My wire mod with a twist, I covered the holes with plastic clips from AutoZone. They are the Large head with the barbs and fit perfect, you just have to paint them....
A new final pic.
A new final pic.
Last edited by RyanSws6; 09-24-2011 at 05:40 PM.
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Also, with the barbs sticking out the bottom in the wheel well, I was able to notch and wire tie everything...
You get a box of like 12 and they're all the same size for like $4. I just stuck them through some card board and a couple light coats of paint. Quick and easy and no bondo or repaint for now.
Still working on my final bat/fuse covers, they need a quick shot of clear to match the semi gloss on the shock towers. Then some blue decals.
You get a box of like 12 and they're all the same size for like $4. I just stuck them through some card board and a couple light coats of paint. Quick and easy and no bondo or repaint for now.
Still working on my final bat/fuse covers, they need a quick shot of clear to match the semi gloss on the shock towers. Then some blue decals.
Trending Topics
#17
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Phatasp, there's so much shine under there that the camara even said I need shades at night time. Nice clean setup.
YUR, No they are the Edlebrock covers. They are no longer made. I bought one of the last sets for my SS. I did polish those. I want a different look on the SS.