TCS guys that did !wire mod
On The Tree
Joined: Nov 2001
Posts: 161
Likes: 0
From: Enola, PA
I'll fess up - this happened to me after I did the !wire mod. What you need to do is look at the connectors to see which ones have two of the same color. My problem was that I inadvertantly switched two of the white wires from one connector.
Once I switched them around, everything worked out great from there -
Once I switched them around, everything worked out great from there -
Thread Starter
TECH Enthusiast
Joined: Mar 2003
Posts: 503
Likes: 0
From: Temple, TX
oh crap I remember now. The very first connector I did had two white wires. I totally forgot to mark one to set it off from the other and I just guessed which one went where. It all makes sense now 
the 8 pin black one has 2 white wires.
Pin G is your tach, is a white wire. You can test with a meter, to get to pin #10 of your PCM on 99-02 (red) or pin 35 Blue (98 only)
it us used for your TCS, and is my guess of why its messed up.
Ryan.
Pin G is your tach, is a white wire. You can test with a meter, to get to pin #10 of your PCM on 99-02 (red) or pin 35 Blue (98 only)
it us used for your TCS, and is my guess of why its messed up.
Ryan.
