02ws.sik

ya the quads do not look good at all. i should be home by at least 8 central time. it will good on your trans am. hard not to look good on a som car. once you get it on you need to drive it and let the exhaust settle. then if anything is hitting you can fix it. the tips take a little bit of time to get em straight. on the kooks you have to take the heat shield off by the over the axle part on the gas tank. i didn't want the exhaust to be that close to the gas tank because all they send you is heat tape lol. to i cut mine up and bent it to were it needs to be. but know its hitting but i don't have my passenger side exhaust hanger by the transmission on because i threw it away. the exhaust fits great and didn't lose any ground clearance. where is minooka il by?

02ws.sik

damn just saw minooka is up by Joliet. i was going to say you could use my car lift.

also op where do you work? i wish i could wash my car at work.

BrntWS6

iTrader: (7)

Didn't know you had to take the heat shield off. Thanks for the offer on the lift, I'm guessing your further South? My car doesn't have insurance until May anyway so it's gonna be jack stands for me.

02ws.sik

ya im by stl area. lol its a 5 1/2 ton lift lol yours wouldn't fall i strap them to the arms just incase it locks to where if the line brakes it still stays up. plus it would only fall 5 ft

stroked383HSR

iTrader: (12)

yeah that fat bastard aint real.....never was and never will be.....now that elf on a shelf...that little ****** is real!!!!


LOL!!!!!!

King Nothing

iTrader: (9)

Yeah she's kinda awesome lol

jlincks

iTrader: (3)

Thanks for all the posts and the compliments. The shifter is from eBay member zrchris. (prolly not supposed to say that) just type in trans am hurst in the eBay search.

BrntWS6

iTrader: (7)

Ordered one the other day...best looking shifter I've ever seen.

stroked383HSR

iTrader: (12)

dang I think im gonna order one.....after lookin at it more....its kinda growing on me and you cant beat the price either.

but it actually looking like its a straight up stick? is it angled in anyway? like the stock shifter?

jlincks

iTrader: (3)

It has an angle to it. I don't know if I have it on correctly but there are grooves on the side of the shifter stick and grooves on shifter base so I just ligned them up and bolted it in.

joblo1978

iTrader: (14)

The Trans Am got nothing from Santa, the Avalanche did though.

SLP dual tailpipe assembly. This replaced the stock resonator and tip.


And an AVS bugflector II

stroked383HSR

iTrader: (12)

**** **** ****....debating on weather to get it...im kinda not liking how it scrunches the boot all the way down.

is this shifter shorter than the stock hurst shifter? my guess is yes.

02ws.sik

Joblo go to a car wash and power wash the belly of that car