is it me?
its yours 25 bucks plus the ride and you can have it. It doesnt have any of those marks on it. Its in good shape. The only thing im keeping are the needles. I MAY go back in and change the TA ones out. You can have the cover only probably less shipping or the entire thing. same price.
88k
My tach was like about 500rpms ahead no matter what I did in HPT so I swapped it out with another one which was the TA one.
I dont know what shipping is but whatever actual shipping is is what I will charge.
Send a pic request to ssdungeon@hotmail.com and ill send you some pics of it.
88k
My tach was like about 500rpms ahead no matter what I did in HPT so I swapped it out with another one which was the TA one.
I dont know what shipping is but whatever actual shipping is is what I will charge.
Send a pic request to ssdungeon@hotmail.com and ill send you some pics of it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
^^Indeed. I added Macewen silver gauge overlays and a Trans Am bezel, and they look much better now IMO! I also added red SMDs since I got tired of staring at the **** yellow stock lighting at night
my Z has the KM instead of mile calibration..we use metric in middle east.. ^^You can! 
White:
http://macewenmotorsports.com/19cawhfaovbe.html
Silver:
http://macewenmotorsports.com/19casifaovbe.html
White:
http://macewenmotorsports.com/19cawhfaovbe.html
Silver:
http://macewenmotorsports.com/19casifaovbe.html
I dont think its just me either...lol.
I want to swap my old camaro needles back. Can I just pull the needles straight off? When putting them back on what should I be careful about? I dont want them to read off. Any write ups? I can get to them. I took the ones off my old cluster. I am more worried about not putting them back on correctly meaning any alignment issues I should be careful about?
Warm up the car. Take a pic of where all the needles location are.
Pop off needles, start car, let it warm up, and put new needles back based on picture.
Easiest way to take needles off is to use a fork. Slip it behind the black dot, and they should pop straight off.
Pop off needles, start car, let it warm up, and put new needles back based on picture.
Easiest way to take needles off is to use a fork. Slip it behind the black dot, and they should pop straight off.
