I did mine with plastidip too 
CETA MOD w/ plasti dip
Thread Starter
11 Second Club
Joined: Sep 2012
Posts: 69
Likes: 0
From: Tulsa, OK
CETA MOD w/ plasti dip Hey guys,
New guy here and new to the f-body's all together. I like the CETA MOD I seen on a few cars so I decided to do it myself with some Plasti-dip. Here are some pics, I hope you guys like it as much as I do.
New guy here and new to the f-body's all together. I like the CETA MOD I seen on a few cars so I decided to do it myself with some Plasti-dip. Here are some pics, I hope you guys like it as much as I do.
I'm thinking about using some of this on a car I'm working on. I am also thinking about doing the CETA mod on my Firehawk with plasti dip to see what it looks like before I commit to panting it.
Is the stuff easy to use?
Is the stuff easy to use?
Trending Topics
Must be a humidity thing cause I spent 4 hours on mine last weekend down here in the south and the texture came out like non skid, looked like sand was in it. From what I read after the fact, I was spraying too far back (6") and should have held the can more like 4"? However, that is not what the instructions on the can says if memory serves...I had to pull it all off, good thing about this stuff is its easy off if you f'up. Not sure if I'll spend another 4 hours on it again or just use regular rattle can?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Same here, I applied 5 coats from a lite mist on up, I understand about the texture not being a smooth gloss finish but this looked like ***, I used 1.5 cans too. And read the install info on dipyourcar.com
Thread Starter
11 Second Club
Joined: Sep 2012
Posts: 69
Likes: 0
From: Tulsa, OK
I put 4 coats on an ended up using almost 1 can...I will try and get more pics, it is rainy and cloudy here in Oklahoma right now. The key is light coats to get the smoothest look.
On The Tree
Joined: Feb 2011
Posts: 101
Likes: 0
From: Orlando/Tampa
Here are some pics of mine.
https://i.imgur.com/TTPgs.jpg
https://i.imgur.com/jz5YR.jpg
https://i.imgur.com/ats9R.jpg
https://i.imgur.com/zng8e.jpg
https://i.imgur.com/TbUHd.jpg
On The Tree
Joined: Feb 2011
Posts: 101
Likes: 0
From: Orlando/Tampa
On The Tree
Joined: Feb 2011
Posts: 101
Likes: 0
From: Orlando/Tampa
