Nuts, bolts, washers, screws...
Originally Posted by 1BadMoFo
ah, nevermind, bought it...chrome on polished 
Did you call and order? Was the total $254 with tax and shipping? What color appearance washer did you go with on your red car?
yes, called and ordered, didn't even ask about the total since it was previously quoted, and I went with the polished washers...I think the anodized red would have been too contrasting from the red body color.
If some reason I don't like them, I'll work out some deal to swap them I'm sure.
they said they had enough instock to fill some orders right away, so better hop to it unless you are willing to wait...I'm still hoping to have mine all on before the big July 4th car show.
If some reason I don't like them, I'll work out some deal to swap them I'm sure.
they said they had enough instock to fill some orders right away, so better hop to it unless you are willing to wait...I'm still hoping to have mine all on before the big July 4th car show.
lol, so basically 3 35th SS from this board will most likely have this product...i like it! Just as a public service announcement, im probably going with black washers.
Originally Posted by travisnd
I am going with black washers as well!
We'll I guess as long as you don't get a GTO shifter and **** our cars won't be 100% the same...and we do have different build numbers and such. Plus I haven't gotten around to doing the FRC's yet, so your still up. 
Teching In
Joined: Apr 2004
Posts: 46
Likes: 0
i just helped a buddy with his engine bolts and the black appearence washers give a very subtle look. its not quite as flashy or noticable as the red ones (we tried both btw) you really have to look close to even notice that they are there.
Teching In
Joined: May 2004
Posts: 5
Likes: 0
This just in from the corrections department at Hillco: kit price is $216.95. And, as requested, here are the components:
LS1-BBK-CH(bracket to bumper support)-$9.95
LS1-BSK-CH(bumper support kit) -$16.95
LS1-CPU-CH(CPU) -$7.25
LS1-FK-CH(fender kit) -$39.95
LS1-HHK-CH(hood to hinge, hinge to body)-$59.95
LS1-HLK-CH(hood latch) -$8.50
LS1-PSK-CH(power steering) -$3.25
LS1-RSK-CH(radiator support) -$31.50
LS1-SK-CH(strut kit) -$20.75
LS1-TBK-CH(throttle body kit) -$28.95
If you add these up, it comes out to $227, but we'll sell it as a complete kit for, as listed above, $216.95, and we'll pay the freight. To recap, the price of $254.95 has been reduced to $216.95, freight included. Any components you'd like to order are available as listed above, freight not included.
Here are some other items, also in chrome button-heads:
LS1-HPK2-CH(2-bolt head plate kit)-$8.95
LS1-HPK4-CH(4-bolt head plate kit)-$17.90
LS1-LPK-CH(rear license plate kit) -$6.75
LS1-STB-H1(Hotchkis strut tower brace)-$8.50
LS1-STB-H2(Hotch. strut tower w/ repacement bolts-$8.25.
There's more on the way. A stainless-steel(unpolished kit) will be available soon, for around $130.00. Remember, they are unpolished, very dull, and will require polishing to look sharp. Polishing is dirty, hard work. Polished stainless will probably be as much(if not more) than chrome. Thanks again for all your patience, guys. have a great weekend. God bless America.
LS1-BBK-CH(bracket to bumper support)-$9.95
LS1-BSK-CH(bumper support kit) -$16.95
LS1-CPU-CH(CPU) -$7.25
LS1-FK-CH(fender kit) -$39.95
LS1-HHK-CH(hood to hinge, hinge to body)-$59.95
LS1-HLK-CH(hood latch) -$8.50
LS1-PSK-CH(power steering) -$3.25
LS1-RSK-CH(radiator support) -$31.50
LS1-SK-CH(strut kit) -$20.75
LS1-TBK-CH(throttle body kit) -$28.95
If you add these up, it comes out to $227, but we'll sell it as a complete kit for, as listed above, $216.95, and we'll pay the freight. To recap, the price of $254.95 has been reduced to $216.95, freight included. Any components you'd like to order are available as listed above, freight not included.
Here are some other items, also in chrome button-heads:
LS1-HPK2-CH(2-bolt head plate kit)-$8.95
LS1-HPK4-CH(4-bolt head plate kit)-$17.90
LS1-LPK-CH(rear license plate kit) -$6.75
LS1-STB-H1(Hotchkis strut tower brace)-$8.50
LS1-STB-H2(Hotch. strut tower w/ repacement bolts-$8.25.
There's more on the way. A stainless-steel(unpolished kit) will be available soon, for around $130.00. Remember, they are unpolished, very dull, and will require polishing to look sharp. Polishing is dirty, hard work. Polished stainless will probably be as much(if not more) than chrome. Thanks again for all your patience, guys. have a great weekend. God bless America.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
Hillco,
Thank you for the reply, that was more than I expected but it is greatly appreciated. If some of these do not fit on the T/A front end will we be able to ship them back for a replacement size? Or am I just thinking out of my *** here?
Thanks again for the list! I think I'll order a few at a time if possible.
Thank you for the reply, that was more than I expected but it is greatly appreciated. If some of these do not fit on the T/A front end will we be able to ship them back for a replacement size? Or am I just thinking out of my *** here?
Thanks again for the list! I think I'll order a few at a time if possible.
Originally Posted by erok01
i just helped a buddy with his engine bolts and the black appearence washers give a very subtle look. its not quite as flashy or noticable as the red ones (we tried both btw) you really have to look close to even notice that they are there.
did anyone see the this SS on the power tour? Im looking for bolts like it has in the engine bay. They were hex style surrounded by a washer that came up around the bolt. looks great I think
TECH Enthusiast
Joined: Jan 2004
Posts: 539
Likes: 1
From: Grand Rapids, MI
Originally Posted by 1BadMoFo
dayum.....I ordered the polished washers, I'm a little worried it'll be too much.
Thanks for the kits Hillco! I'm going to have to start replacing the bolts in mine piece by piece, I can't spend $200 at one time on bolts unless it was for the engine... my wife would kill me!
TECH Resident
Joined: Feb 2002
Posts: 940
Likes: 0
From: Westminster, MD
Originally Posted by LS1 Sounds
Thanks for the kits Hillco! I'm going to have to start replacing the bolts in mine piece by piece, I can't spend $200 at one time on bolts unless it was for the engine... my wife would kill me!
