Updated TA photoshoot time.
Updated TA photoshoot time. Changed alot of things over the years.
You cant tell but there are flat black blackbird stipes on and wing tips.
i like it this way.
To do list:
Pcm cover
Front washer bottle cover
Fuse center cover
Anybody know where i can get some nice brakelines?
and some art for you guys!
You cant tell but there are flat black blackbird stipes on and wing tips.
i like it this way.
To do list:
Pcm cover
Front washer bottle cover
Fuse center cover
Anybody know where i can get some nice brakelines?
and some art for you guys!
Last edited by 1nverted; May 12, 2013 at 05:32 PM.
Now THAT is an engine bay to envy! Gorgeous! 
Have you thought about swapping the screen in the MAF for a saxonpc screen? Larger openings, still functional as an air straightener... I think it would work well considering the clear MTI lid.
Have you thought about swapping the screen in the MAF for a saxonpc screen? Larger openings, still functional as an air straightener... I think it would work well considering the clear MTI lid.
never heard of a saxonpc screen. info? ill look into it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo I think my only option would be to get an adjustable coil over, and lower just a hair.
The screen is mentioned in the external Gen 3 sub forum, its a big old thread in there... I have one on my 100mm maf car and one on my ported maf car. Actually I even had a clear lid on the 100mm maf, it looked good! And functioned of course.
The rings around the vents are also painted if you cant tell.
not a big fan of too much black on a car but damn does this look good. i really like it.dont know about the steering wheel tho. also is that an engine start button on the cigarette lighter location?
The steering wheel is an a/m one that was gifted to me. it takes a momo adapter ( found one on ebay ) Its not everybodys cup of tea, but i like it. One day though i will upgrade to that vette steering wheel mod.
Yes it is, i deleted the TCS and cig, thanks to emblem pros for the tcs cover.
and installed the engine push start mod. Couldnt stand the chrome ring so i dissassembeld the push button painted the ring and put it back together.
Thanks, here you go my freind:
Some simple shots i took this morning.
Emblem pros plate and engine push start button
Painted ac vent rings
Ceta seats and roll bar
(my uncle had a ceta, lost as a total loss. i ended up with the car,parted it out and run these as a tribute almost lol. besides they were much nicer than my old seats)
Visor delelte i found on ebay, well made
Engine bay
Im in the process of trying to make a cover for the hood latch/washer bottle area. im not good with working metal so its going slow. plan is to have a cover painted gloss black to hide the support and all that stuff but still have access to hood latch.
and installed the engine push start mod. Couldnt stand the chrome ring so i dissassembeld the push button painted the ring and put it back together.
Thanks, here you go my freind:
Some simple shots i took this morning.
Emblem pros plate and engine push start button
Painted ac vent rings
Ceta seats and roll bar
(my uncle had a ceta, lost as a total loss. i ended up with the car,parted it out and run these as a tribute almost lol. besides they were much nicer than my old seats)
Visor delelte i found on ebay, well made
Engine bay
Im in the process of trying to make a cover for the hood latch/washer bottle area. im not good with working metal so its going slow. plan is to have a cover painted gloss black to hide the support and all that stuff but still have access to hood latch.