Installing Sonar Halo w/HIDs
#1
Teching In
Thread Starter
Join Date: Mar 2011
Location: McAllen, TX
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Installing Sonar Halo w/HIDs
I'm helping a friend install some Sonar halo lights with HIDs, we've wired up the passenger side and all the halos were illuminated and the LED three little lights on the side too, but when we wired up the drivers side only the headlights low beam themselves wanted to work on both sides and the tail lights are out and the gauge cluster lights arent working and neither are the turn signals. We tried wiring them up to the brown wire in the turn signals but that doesn't seem like it works well. I've tried searching and find several different answers about this, what I want to know is what is the correct way to wire the halos so all the halos are illuminated and the three LEDs as well? More specifically, which wires should we feed power from and which should we stay away from? Thanks in advance guys.