Headrests
i got mine back on thursday from custom embroidery works (grant)
very nice work
here is a pic
http://community.webshots.com/photo/...58457248kAlrNa
very nice work
here is a pic
http://community.webshots.com/photo/...58457248kAlrNa
Teching In
Joined: Jan 2004
Posts: 9
Likes: 0
From: Rio Rancho, NM
Want the "Last of the Breed"
Originally Posted by BlackHawk131
Staging Lane
Joined: Jun 2004
Posts: 70
Likes: 0
From: Newburgh, IN/Bowling Green, KY
How to you get TA headrests off!!!!! Is it complicatied or am i really missing something, sorry if this looks bad they have just got me pissed off. I am embroding SS in them, i have them in my SS. Thanks
You have to raise the headrest. Unlatch the bottom(open it up). Then start pulling from one side making sure that the opening slides over the foam. Continue pulling from one side. It takes some time, but you can do it. Maybe use a blow dryer to heat them up. This will help them strech.
BlackHawk, those are some nice headrests!! Is your shop on Elmo Weedon Rd out there by Lavco?
I was wondering, do you do full seat covers, or maybe something that you would be willing to do? I'd like to get some leather seat covers, probably with some custom embroidery work done on them, in order to help protect the factory leather....and I would like them to be a really snug, tight fit so that it doesn't wrinkle as much.
I was wondering, do you do full seat covers, or maybe something that you would be willing to do? I'd like to get some leather seat covers, probably with some custom embroidery work done on them, in order to help protect the factory leather....and I would like them to be a really snug, tight fit so that it doesn't wrinkle as much.
Originally Posted by 02Z28LS1
BlackHawk, those are some nice headrests!! Is your shop on Elmo Weedon Rd out there by Lavco?
I was wondering, do you do full seat covers, or maybe something that you would be willing to do? I'd like to get some leather seat covers, probably with some custom embroidery work done on them, in order to help protect the factory leather....and I would like them to be a really snug, tight fit so that it doesn't wrinkle as much.
I was wondering, do you do full seat covers, or maybe something that you would be willing to do? I'd like to get some leather seat covers, probably with some custom embroidery work done on them, in order to help protect the factory leather....and I would like them to be a really snug, tight fit so that it doesn't wrinkle as much.
Grant
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by BlackHawk131
If you would like to come out to car club on Friday, we can then talk and go from there. I will be in the Black Firehawk. I would have to see what you are wanting to do. We meet at the Sonic on Harvey Rd around 10pm.
Grant
Grant
how long will you guys be out there? and when is the next one?
Teching In
Joined: Jan 2004
Posts: 9
Likes: 0
From: Rio Rancho, NM
Got my "Last of The Breed" headrest yesterday 
These came out EXTREMELY well! I am so freakin happy with them. The comments from other F-Body fans in Albuquerqe last night was all positive and they want theirs also! Grant did a wonderful job and the price was just right. The price and the quality are not even justified. The price is too low for the quality, but I'm not complaining, get yours done! 
Troy Gabazon@cableone.net
Teching In
Joined: Jan 2004
Posts: 9
Likes: 0
From: Rio Rancho, NM
Removing the headrest
Originally Posted by oramac68asf
How Do you get TA headrests off!!!!! Is it complicatied or am i really missing something, sorry if this looks bad they have just got me pissed off. Thanks
Unscrew the belt holder, then unhook the underside of the headrest. Take the inside part off first, inside towards the other seat. You will feel like you are going to rip them, but go slow and once you get part of the inside coming up, then start with the oposite side. Put them back on with the outside first working the inside over the cushion. The cushion will give enough so you can achieve this without ripping the leather. Good Luck! Troy
All prices have been dropped. Most designs now are 65 and 75 for the larger designs. This includes return shipping. We are now selling the designs so that you can have your local shop do them for you if you like.
Hey guys, all prices have been dropped to 65 and 75 for all designs. I also sell the file so that you can have a local shop do them as well. If you have questions, please email me at pontiacfirehawk@hotmail.com.
Thanks,
Grant
Thanks,
Grant
Grant did great work on both sets of headrests. even made sure i got them on time for a car show that got canceled due to hurricane jeanne. well it's be rescheduled for oct 3rd. so i'll still be able to show them off. mine are the silver ones for the black 00 formy. the pink ones are for the wife's 99 formy.
