GTO seats in a WS6
Thread Starter
Teching In
Joined: Oct 2015
Posts: 3
Likes: 0
GTO seats in a WS6 This is my first post on here. Anyway I'm about to do a little project on my ws6 I recently bought. It has some shitty racing seats so I picked up some 06 gto seats off craigslist. I'm about to start on the install and make brackets. I'll add more pics. Let me know if you've seen it done or tips.
Well it WORKS!
Used one existing stud on the front inside.
the other side I welded a plate to the existing tracks to reach the other stud.
For the back drill holes through the track and put nuts on the bottom. Then wired it into the factory wiring. Tight fit but was more comfortable.
Well it WORKS!
Used one existing stud on the front inside.
the other side I welded a plate to the existing tracks to reach the other stud.
For the back drill holes through the track and put nuts on the bottom. Then wired it into the factory wiring. Tight fit but was more comfortable.
Last edited by ws6tommygun; Nov 1, 2015 at 12:52 AM.
On The Tree
Joined: Jul 2015
Posts: 138
Likes: 0
From: Gensokyo
Pontiac always had better seats IMO. The Camaro seats are actually decently comfortable for me, but I'm a small person. But they need proper side bolsters. I like being held in place while driving rather than feeling like I'm just kinda sitting there. The GTO seats look so comfy!
