When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
There was a thread in the firebird section where they were tracking the 1le formulas.
When I had a formula I was very interested in them, if I recall correctly I've seen 4 or 5 on this site pop up for sale. Most have been relatively stock, and most are silver or black. I believe only 1 was made in the gold 98 only color but that's off the top of my head
There was a thread in the firebird section where they were tracking the 1le formulas.
When I had a formula I was very interested in them, if I recall correctly I've seen 4 or 5 on this site pop up for sale. Most have been relatively stock, and most are silver or black. I believe only 1 was made in the gold 98 only color but that's off the top of my head
Yep you're correct. One gold built, older lady owns it, it appeared at a pontiac event a few years ago. I've had an interest in these cars since 2012 when I saw this one I bought. At the time I was searching for a 1LE camaro, and came across the limited number of these cars and it interested me. I've seen 2 or 3 black here for sale over the years, I've seen a silver '99 car, haven't seen the other silver '98 but saw something about it in a rare car thread - probably the one you mentioned - and someone said that it was in GA where it was originally sold. There's a couple of all out drag race cars built from them on this site, one is a black one the other is a red one.
I would LOVE to get a site/registry together and make it popular enough to actually track these cars. I did hear a rumor that at least 1 and possibly 2 of them were totaled out.
Raised up the front end from slammed to about just about right. Used some grade 8 nuts and a washer under each strut mounting blade on top of each lower A-arm to raise the nose 1/2".
Before:
After:
Also added the front bird, replacement ram air hood decals, and rear 'pontiac' fill in metallic charcoal vinyl
Have a few more exterior details and lighting going on this weekend. Still lovin this car.
Done a few more things with the car over the last couple weeks. Added some more charcoal vinyl ('formula' over the door emblems), tinted the windows 30% on the sides and 15% on the back, and redid the entire front lighting. Added 60mm hella projectors, 5000k 55w HIDs with a morimoto dual relay harness, tram plates, new LMC truck highbeam housings (LED bulbs on the way), new parking/signal light housings with iJDMTOY amber/white LED switchbacks, and the morimoto knockoff LEDs that some guys are using in another thread on here on trans am's. They fit great in the formula bumpers as well. HUGE improvement in lighting, literally unbelievable change and feels like a I'm behind the wheel of a much newer car at night.
Here's the output with just the parking lights and low beams. I didn't get a pic with the fogs on as well. The fogs add an amber glow around everything and I think will add a lot of functionality in foggy mornings.
Been tinkering with the car here and there. Latest modification has been to the exhaust and had my buddy do a retune on it on 91 octane (our premium pump here in OK). I had the local exhaust shop install a 3" to 4" flowmaster merge, 4" dynomax bullet, then a 4" QTP cutout, necked down to the factory exhaust. I'm going to pick the car up tomorrow, but here's a dyno graph of closed/open with the cutout.
Yep! Even though the 1LE is what it is, the exhaust is no different than the single out muffler found on all '98 WS6 cars. I'd had good luck with cutouts in the past with NA deals and boosted setups. A '99 Z28 I had with a set of PRC stage 1 heads and a TREX cam on a 110lsa gained 30rwhp going thru a 3.5" cutout, and a turbo car gained 45rwhp using a cutout. Love how you can go from stealth to crazy sounding with the flip of a switch. It appears to have lost a little at the peak hp from the 93 to 91 tune, but torque was pretty similar before, and opening that up helped a lot there as well.
Do you have a dyno comparison before you added the 4" merge? We're you able to feel a difference when you made the change? I am considering doing this on my car before I get it tuned.
The car made 407/363 on 93 octane at Cartek in NJ with the previous owner. It had the same combination except 3"/3" out ypipe and 3" stock catback. So no real comparison due to the octane changes. But you can figure the similarities. If you put a high flowing catback behind it and neck it down to 3" over the axle you'd maybe lose ~<5rwhp.
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.
