Trans Am headlight cover removal
#1
Teching In
Thread Starter
Join Date: Sep 2018
Location: Little Rock
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Trans Am headlight cover removal
Can the covers be removed without removing the entire assembly? Plenty of posts on that, but can’t locate one for just the covers.
Thx
Thx
#2
TECH Apprentice
You're referring to the metal top of the headlight assembly, with one having the PONTIAC logo? There are 4 screws holding it on. 2 are accessed with the headlight down, the other 2 with it up.
#3
Teching In
Thread Starter
Join Date: Sep 2018
Location: Little Rock
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Yes, but I am thinking the covers are fiberglass for a 2000 year model. I am unsure of how I could access any part of the assembly with the headlight and cover down, but I’ll look it over this evening.
Thx
Thx
#4
TECH Apprentice
I'm parting out a 98 and own an 01, both are metal. Pop the hood, and look at the back side it it. You'll see two tabs with screws holding it down. Then with the headlight up, on is on the front, one is on the side.
#6
TECH Apprentice
I forgot one thing, once it's popped up, there are 3 screws holding on a black bezel that covers up the low and high beam headlights. That has to come off to access the front/side screws. I tried googling a pic for you but no dice. I can take a pic when I get out to my car after work and show you where they're located.
Trending Topics
#8
TECH Resident