Corvette Seats
#4
On The Tree
Join Date: May 2003
Location: San Antonio
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BAD *** TA WS6
Yes they do fit.
Do a search on this, we've all gone over it 1000 times.
Do a search on this, we've all gone over it 1000 times.
lets play nice....
yes they fit....here you go:
vette seats in a TA
http://community.webshots.com/photo/...44059698KknAvU
http://community.webshots.com/photo/...44059701wenOue
#7
BMW ///M Nerd
iTrader: (5)
If we're talking "job" as in just the leather work, and seats then....
4 Corvette seats will run you about 1000 each. Depending where he bought them. They usually pull anywhere from 700-1200 bucks on Ebay in various conditions.
Leather inserts on the wheel would cost about 200 bucks.
I don't have a clue on the cost of the leather covered instrument cluster plastic shroud, nor the center console.
The rear seat fabrication would probably cost in the area $1500 bucks.
He obviously spent some money on it, as you can see from the breakdown, things add up fast.
I checked the car out at an PCA track day up at NH International Speedway. Nice setup, but I'd definately change a few things on the car. He had some reeeal ugly 19s on the car when I saw it.
4 Corvette seats will run you about 1000 each. Depending where he bought them. They usually pull anywhere from 700-1200 bucks on Ebay in various conditions.
Leather inserts on the wheel would cost about 200 bucks.
I don't have a clue on the cost of the leather covered instrument cluster plastic shroud, nor the center console.
The rear seat fabrication would probably cost in the area $1500 bucks.
He obviously spent some money on it, as you can see from the breakdown, things add up fast.
I checked the car out at an PCA track day up at NH International Speedway. Nice setup, but I'd definately change a few things on the car. He had some reeeal ugly 19s on the car when I saw it.