kapedogg

iTrader: (5)

The plastic just came in, and I'll probably get started on making the plate this weekend. What did y'all use as a template to get a nice precise cut? Any suggestions? I'm working on the final design idea in my head. I'm thinking 1 covered arming switch, with two regular toggles next to it for the bottle warmer and the remote opener. Then a purge button near the top on the right side with a toggle below it that clicks from side to side with a LED on each side for the fans. Or should I put the purge button in the middle next to the other toggles and then the fan switch going up and down to the right of that so that everything is in a straight line across the middle? What y'all think about those ideas?

blaSSt

iTrader: (7)

Posterboard template here.

kapedogg

iTrader: (5)

That's what I had in mind...What are your ideas on the switch arrangement? Basically going with 1 covered arming, two regular toggles for NOS stuff, a Purge, and a fan switch. Any suggestions?

kapedogg

iTrader: (5)

The switch panel is complete, and looks pretty sweet! Can somebody tell me how to post pics?

69_YENKO

iTrader: (16)

you can attach it using the "additional options" below or [IMG]link to picture[/IMG]

BigE

iTrader: (2)

I know this is an old thread, but I'm digging it up because it relates to my problem.

The traction control plate in my Formula was broken when I bought it. I purchased a new one through GMPartsDirect.com to replace it. Part number 10280510. However, this is the plate for the Camaro convertible. It doesn't have the Pontiac symbol on it, but more importantly, the mount for the TC switch is different from the convertible top switch. I can't use this piece. Any one know the part number for the Pontiac variant?

Thanks

6LITEREATER

iTrader: (56)

You have mail! I accidentily got the panel you need and you have the one I need !

BigE

iTrader: (2)

You have return mail.