Backlit Headlight Knob On TA
Basically, I bought another **** just like the one I used for the AC, cut the shaft down considerably and glued it back on, mounted a small red LED in the ****. Drilled a hole into the **** area of the switch, ran wiring through the hole and then wired it up to ign. using a resistor. It's harder than it sounds, but works great.
Alright, here is the day shot.

Here is the night shot with the lights off but ignition on.

My thread on the AC *****:
https://ls1tech.com/forums/showthrea...=1#post2307794
Trending Topics
The Best V8 Stories One Small Block at Time



