. i'll definitely be adding it to my "to do" list if you can get it to look anywhere near the actual sunoco hood 
sunoco camaro hood
sunoco camaro hood As most of you may know we're currently working on a hood for production, we have our basic scoop shape completed now, but we are in need of some more pictures such as a front view to determine the width's and angle on the side's, any help would be greatly appreciated. Thanks
I have a ton of photo's of the dick harrell camaro, but compared to the sunco hood, the dick harrell doesn't seem as 'smooth'. If you want the ones of the dick harrell let me know and I'll post up a bunch.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
What about the fenders?
i think the hood was custom made and the fenders wont be for sale they only made enough for the cars (30 of them) and a couple of them if someone wrecks one umm i know i know some more on it i was at gmmg when they were finishing up the car my grandad was one of the people that signed the cars . its vey bad *** i was really impressed by it well it was one reason y i got my car
oh i also have pics of the car and some of the cars at last yrs atlanta gathering
thanks for the links guys! Unfortunately what we are trying to check out is a front view to see about how wide the scoop is in the front. Does anyone have any pictures of this?
I know that there are several guys interested in the flared fenders.....but if it is something that we take on - unfortunately it will have to be later down the road - perhaps later this year? We currently have several mold projects on our to do list - so we need to catch up with these first.
The guys who said they have more pics, do you have a front view of these.
Thanks!!
Jeanie
I know that there are several guys interested in the flared fenders.....but if it is something that we take on - unfortunately it will have to be later down the road - perhaps later this year? We currently have several mold projects on our to do list - so we need to catch up with these first.
The guys who said they have more pics, do you have a front view of these.
Thanks!!
Jeanie
Last edited by vfntech; Feb 4, 2005 at 10:47 AM.
Xsta Z 28 - Ya I can see how its based off it, but the sunco version seems to be more smooth in the front where the cowl meets the hood and the sides seem to be more angled. Could just be me, but this is what I've noticed in all the photo's.
vfntech - This is the best front photo's I have of the car. Should be good enough for ya
vfntech - This is the best front photo's I have of the car. Should be good enough for ya
Thank You Madice!!! We did have thumbnails on our last thread, however, they were not from the front.
We are not planning to modify the scoop in height.....so i believe it'll fall somewhere around 3".
abadss~ we did have pics, however, they were of the front to where we could see the width of the scoop - where it meets the hood.
Thanks again Guys.
Jeanie
We are not planning to modify the scoop in height.....so i believe it'll fall somewhere around 3".
abadss~ we did have pics, however, they were of the front to where we could see the width of the scoop - where it meets the hood.
Thanks again Guys.
Jeanie