front end....
Thread Starter
TECH Regular
Joined: Feb 2005
Posts: 433
Likes: 0
From: Elizabeth City, NC
front end.... i am in the process of sanding my front end down to do some new paint. it is going to be either SOM tearing off into the white or a dark candy purple color that i have a gallon of sitting in my garage, what would you guys do? and also here is a pic of a grill/screen idea i have, anyone make this already or have any ideas on how to attach it to the bumper?
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
I havent done it (I don't even own a Camaro), but from what I have seen, most attch it to the back of the hole instead of it being in the hole.
Here are some old threads I dug up:
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...ght=grill+mesh
I know there was a write-up somewhere, but I can't find it. While searching, there was someone in one of the threads that said he bent the sides of the mesh and pushed it into the foam behind the grill. I dont know how well that will hold up over time though.
Here are some old threads I dug up:
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...t=gutter+gaurd
https://ls1tech.com/forums/showthrea...ght=grill+mesh
I know there was a write-up somewhere, but I can't find it. While searching, there was someone in one of the threads that said he bent the sides of the mesh and pushed it into the foam behind the grill. I dont know how well that will hold up over time though.
Copy & Paste Moderator
Joined: Apr 2002
Posts: 9,764
Likes: 208
From: Eastern MA
Originally Posted by blindskater02
attach it to the back of the hole, using bondo or staples would be my best guess??
