Getting car ready for paint?
Thread Starter
TECH Apprentice
Joined: May 2002
Posts: 332
Likes: 0
From: richardson, tx
Getting car ready for paint? so i'm gonna be stripping the car down this next week, and i was wondering if anyone had any advice on stripping the paint off and prepping it?
thanks
matt
thanks
matt
just sand it down with an dual action sander, you can get one off ebay for around 20 bucks, take it over the whole body, what you cant reach do by hand, use 50 or 80 grit sand paper, then tape off the car and primer the whole thing. wetsand the car with 400 grit sandpaper and it will be ready to paint. heres a good website.
http://www.automotivetouchup.com/index.htm
http://www.airbrush.com/how-to-guide...toDetail&id=47
http://www.carcraft.com/howto/24820/
http://www.automotivetouchup.com/index.htm
http://www.airbrush.com/how-to-guide...toDetail&id=47
http://www.carcraft.com/howto/24820/
