new aluminium interior mods
Originally Posted by prelude00782
no offense, but I'd lose the pedal covers. Those come loose all the time, last thing you need is a piece of plastic getting in your way when trying to brake in the middle of traffic. Plus it looks kinda ricey and the rest of your car is immaculate. They sell awesome ones made out of metal that are more pricey but look way more stock.
I do want to get realy nice pedals some time in the future. Thank you for the compliment. 
im still lookin too. I just hate to pay that much for a kit made so easily. I have been pondering makin my own out of some brushed aluminum i have at home. Would be harder than it seems though.
Custom radio install Here is my pioneer deck custom installed in brushed Aluminum.
Now I need to do the headlight switch plate, HVAC controls & speedo benzel.
Im also gonna paint my speaker grills, vent sorroundings & pillar vents in Aluminum. Hopefully it will all tie in together & look great. Too much of a plastic look all stock. My interior is also tan & the color of the dash(no quite what i would call black) Im planning on dying the doors & dask black except the perferated material in the middle of the door. I will also dye all the back plastic panels & hatch pannels. I think it will look great with the aluminum accents & custom tan & black interior.
Now I need to do the headlight switch plate, HVAC controls & speedo benzel.
Im also gonna paint my speaker grills, vent sorroundings & pillar vents in Aluminum. Hopefully it will all tie in together & look great. Too much of a plastic look all stock. My interior is also tan & the color of the dash(no quite what i would call black) Im planning on dying the doors & dask black except the perferated material in the middle of the door. I will also dye all the back plastic panels & hatch pannels. I think it will look great with the aluminum accents & custom tan & black interior.
this may be a little crazy for some people, but check it out and let me know waht ya think. i did it all myself, all painted too, no vinyl.
http://www.cardomain.com/ride/1514584/3
http://www.cardomain.com/ride/1514584/3
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by CAMAROBOY69
Thanks for the compliment again. Here is a really really good update!! 7/27/05!!
MAJOR UPDATE 7/27/05
Dash transition piece is in, stereo is in, and here are some videos of my Autometer gauges in action as promised.
I took the original 69 Camaro defroster vents and put them in the center of this piece I made out of 20 gauges steel. I might eventually cover it in leather. All gauges work 100%!!
MAJOR UPDATE 7/27/05
Dash transition piece is in, stereo is in, and here are some videos of my Autometer gauges in action as promised.
I took the original 69 Camaro defroster vents and put them in the center of this piece I made out of 20 gauges steel. I might eventually cover it in leather. All gauges work 100%!!
Originally Posted by CANNIBAL
Will you still sell the center piece to hold the Autometer gauges? I LOVE this!
big mike it looks good so far,do not do the paint work, i suggest (no ofence kyles 2000z, you did a great job and above all original with those flames on it.... but i would not dare this myself...... Id prefer autentic aluminium, instead of silver paintwork!!)
im not gonna use silver. Im gonna use plastikote aluminum paint. I know how to prep the plastic & how to wet sand so it will look good. Im even thinkin bout goin with the MacEwen silver faced overlays now. Then I will get a small Aluminum dask trim kit to finish it off.
Originally Posted by NYC FRANK
If you take the time to prep you'll get good results. $12 for 2 cans of Krylon interior paint & some elbow grease. P.S.- Very trick dash Camaro boy !
Bill
I used a 300m shift ****. Plan on wrapping the radio bezel and shift plate "drive,reverse,neutral, ect". clear coated center console. And I'm going to get a GTO 5.7 Liter emblem for the dash. I also want to do rings around air vents, but dont know where or how to make those.
Last edited by luckyou03; Jan 1, 2006 at 05:43 PM.
[QUOTE=luckyou03]I used a 300m shift ****. Plan on wrapping the radio bezel and shift plate "drive,reverse,neutral, ect". clear coated center console. And I'm going to get a GTO 5.7 Liter emblem for the dash. I also want to do rings around air vents, but dont know where or how to make those.
nice nice&nice
nice nice&nice
i fiberglassed mine and you can paint it the finish of your car or whatever you can dream up you can put custom gauges in it or hide switches all kinds of stuff its a little expensive a little high maintance considering i wax it everytime i wax my car but damn it looks awsome lots of compliments on it ill get before and afters up soon so you can see it