would be nice!Ill post you mine

 

u need prtnr 10409245 aswell left & right

 

Help me!!! help me!!!
I am in the process as we speak...........damn brackets...........my headlights werent lining up.........I guess we know why...........also i pulled that long plastic piece that stretches across the front bumper and mounts to it.............I noticed it was going to be in the way. Send me a list off all parts and prices and pics ect.....
I am also doing the T/A rear bumper......havent got it all the way off yet.
Let me know guys
thanks

 

the headlight assy you have to remove as a whole piece with the center plastic bezel aswell...........sent you the whole list already u won´t need more!now it is up to you!!!!!!!!!!!!!!!

 

thanks to all of you guys, specially boyd, xxxtransam, mxracer for all your info and help. here are a few pictures she's almost done waiting on the ground effects, clear corners, and the cat back exhaust system.
http://www.cardomain.com/my/edit_page?page_id=2131767

heres my link for pictures.

 

http://www.cardomain.com/ride/2131767/1

 

http://www.cardomain.com/ride/2131767/1

 

http://www.cardomain.com/ride/2131767/1
heres my link for the pictures still working on it....

 

i have a 95 formula that i made into a 2002 trans am. any questions let me know be happy to help

 

sorry i just found this thread... oops.. looks like i'm late... well as for the brackets there are 3 brackets that fit in the area of the fender/bumper area. should run you about $60 for all 6. there is one that runs in bumper that allows you to secure the upper part of the bumper to the top of the fender. also there is a bracket that the bottom the fender/bumper meet at... your old one will technically fit. but your fender/bumper will pinch inwards. there are two brackets the mate to form the same shape but allow for a perfect alignment.

As for the headlight motors... as it seems i'm already late if you have the money and tiem to pull the headlights back out i'd suggest upgrading the gear inside. eventually it will go out.. it not a question of if but when.

Did you figure out how to make both your lights and motor work with the old harness? it's pretty stright forward but if you need help let me know.

as for the headlights themself in lining up.. if you take the cover off there are some adjustments underneith. you can move the headlights in almost anyways you want. also you will find that if you adjust the hood stops you can raise and lower the hood.

I posted this in your other tread but i'd suggest getting the t.a rebumper... just because of the lines if you dont' have it your side skirts will look pretty retarded.

lastly a few things you might want to look into that you don't already have.. new tail lights. obvious. and windshield wiper arms.... Also one thing I foudn that added a few ponies was an LS1 intake box w/slp lid. not only does it just look better but really does help..


IF you have questions I have answers... at this point my conversion minus motor is 100% complete and it's flawless. I even replaced the whole interior with ebony including dash, headliner, sailpanels, door panels, blah blah blah EVERYTHING!!!. so my car minus drivetrain is all 02.

 

some picks for ya

 

thre is a bracket and forgive me for not having a part nubmer handy i'll find it later for ya that fits on the inner side of the front bumper that connects to the part in pics 2. hope this helps.

 

heres a link to mine.

https://ls1tech.com/forums/lt1-lt4-modifications/345307-my-converison.html

 

guys im curious is this a really hard conversion to do?

 

No... the headlight alignment is probably the most difficult... ALl you really need is $20 toolset from walmart and some time. FYI you must have a 10mm.. I'd suggest buying a couple also maybe buying some new bolts to replace old ones.. otherwise it's really straight forward... you have to realize this is basically what gm did.

 

Hey guys i need some help also...the list of parts that I have right now are

WS9 outlaw hood, both fenders, front t/a bumper, foam bumper absorber, the plastic piece that the top of the bumper mounts to, foglights, turn signals, parking lights, headlights...what other parts am I going to need and what type of problems will I run in to...wiring, fitment, etc. Please pm me or email me at jlesher32@houston.rr.com Thanks in advance

Joshua

 

Gonna post before and after pix?

 

looks great,glad I could help!!!

 

hey, i have a friend that has a 95 TA, green, needs the front fenders, nose, lights. You still have all the old stuff you took off?

TIA!

 

i still got the hood, drivers side fender, air deflector, slash shields, email me at jlorenzana1231@sbcglobal.net I'll try to go over with i got left when i get hime tonight