AeroForce Tech Interceptor Gauge
Thread Starter
Joined: Jun 2004
Posts: 5,125
Likes: 4
From: Alexandria, VA
AeroForce Tech Interceptor Gauge I just came across it yesterday:
http://www.pfyc.com/store/merchant.m...ct_Code=GN2110
Anyone have it? Looks pretty sweet if it will actually be able to perform all of those functions. It seems a bit iffy on some of them, but seems like it might be something useful/original.
http://www.pfyc.com/store/merchant.m...ct_Code=GN2110
Anyone have it? Looks pretty sweet if it will actually be able to perform all of those functions. It seems a bit iffy on some of them, but seems like it might be something useful/original.
TECH Enthusiast
Joined: Aug 2003
Posts: 546
Likes: 3
From: Northeast TN
These things work awsome!!!! They are the greatest gauge you could have in your car. Everything they say they do, THEY DO! I have a buddy with a Pro-charged SS and he has one. It is awsome. I want one sooo bad, but guess I hafta wait for a little while.
They connect thru your OBDII port under the dash. No hard wires or anything.
They connect thru your OBDII port under the dash. No hard wires or anything.
you have to hardwire the 12v and ground.....
the gauge also scans and clears codes, sounds pretty cool
i know a sponsor had a sale on them a while back too,i forget who though
the gauge also scans and clears codes, sounds pretty cool
i know a sponsor had a sale on them a while back too,i forget who though
Originally Posted by wickedbird00
They connect thru your OBDII port under the dash. No hard wires or anything.
TECH Enthusiast
Joined: Aug 2003
Posts: 546
Likes: 3
From: Northeast TN
actually, hondo is right, cause if you don't hardwire the 12v it would pull juice thru the OBD port all the time. this way it cuts on and off with the car. Don't think there is a ground though. I thought my friend said something about it grounding thru the port or something.
Thread Starter
Joined: Jun 2004
Posts: 5,125
Likes: 4
From: Alexandria, VA
Originally Posted by wickedbird00
Everything they say they do, THEY DO!
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
ive got 1 as well.....did a mock up in 5 minutes it was up and running scanning for Knock and timing.Its a 
gauge.There is only a power wire u have to hook up other than that just plug it into the OBD2 port and good to go.Zombie in the Forced Inductions section is running 1 with his turbo setup.im a fan of them.
gauge.There is only a power wire u have to hook up other than that just plug it into the OBD2 port and good to go.Zombie in the Forced Inductions section is running 1 with his turbo setup.im a fan of them. 
well im sooo glad my girlfreind just orderd me one for my birthday on this coming tuesday!!!! yeaaaa.....she orderd it last thursday heeheh yessssssss!! im glad to see they work great!!
TECH Fanatic
Joined: Aug 2003
Posts: 1,130
Likes: 1
From: Tranås, Sweden
I have it too. Just keep it out of the sun on those hot summer days! Mine went out after a few months this summer. They sent me a new updated one that is supposed to handle heat a little better. The newer one has a seperate red wire to turn it on. I think I will put a switch on to disable it when it's too hot in the guage pillar. Other than that it's awesome!
Last edited by thunderdan74; Nov 23, 2005 at 10:44 AM.
https://ls1tech.com/forums/showthrea...ight=aeroforce hey there is a picture on the GTO board of a guy with 2 mounted.. and his is reading Oil Pressure!!??? how is his doing it and no one else is?
Last edited by KiLLJ0Y92Z28; Jan 1, 2006 at 10:32 PM.