Short stick pictures...
Originally Posted by tmgsix
Sweet, please do. I have been planning on cutting mine down for awhile now, so hopefully seeing yours will get my lazy *** to finally do it 
b&m ripper (2 piece older style) shift lever was cut 2", bottom of shift **** was cut also so the rubber boot would make perfect contact with the bottom of the ****.
Here's a few pics (don't mind the dust - still in storage for the winter). Stock Hurst w/ Lou's.
Make sure you tie up the shift boot inside at the top of the stick with a tie-wrap after the install otherwise it looks bad with all that extra material laying in there.
Make sure you tie up the shift boot inside at the top of the stick with a tie-wrap after the install otherwise it looks bad with all that extra material laying in there.
Originally Posted by FIREHAWK#608
I put the short stick on last night and it has a f#ckload more noise now! The rubber isolater is good in my opinion. I'm going to cut out some of the factory stick, re-weld it, and putting the shortened factory stick on. I'll sell the non-isolated short stick when I'm done.
Has anyone done anything about all the excess boot material? I imagine you could just cut some material off of the bottom. Has anyone done this?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by 32of32
Here's a few pics (don't mind the dust - still in storage for the winter). Stock Hurst w/ Lou's.
Make sure you tie up the shift boot inside at the top of the stick with a tie-wrap after the install otherwise it looks bad with all that extra material laying in there.
Make sure you tie up the shift boot inside at the top of the stick with a tie-wrap after the install otherwise it looks bad with all that extra material laying in there.
That looks like **** bro, this is how you gotta roll with a LSS...
wow, for once i actually agree with something spuds said (not that his setup looks any better). I just wish I knew someone who could restitch the factory leather boot to make it similar to 32of32's just not bunched up. I have an LSS on my stock Hurst and love it.
Heres a crappy pics of my shift handle. 6 inch ws6 store shift handle with a hurst classic shift ****. keep in mind that i could adjust the height on my shift **** so if u have a stocker shift ****, it will be shorter.
Last edited by CaliboyTA; Apr 5, 2006 at 01:30 AM. Reason: more pixs
