Getting stripes put on.. Where? (MI)
Originally Posted by SS LS1 MI
Nope no bubbles, but I can see it would be easy to get some in there. But as you know they will either remove themselves (if they are from trapped water) or just use the pin ***** method as Wade mentioned.
Never install the stripes out in the hot sun or I can almost be sure you will get plenty of bubbles. The paint should be cool to the touch to keep the water film from drying too quickly. Or you won't have a chance to squeege the air/water bubbles out before the vinyl stripes are "Stuck" into position.
Wade..... No Problem bud!! Actually I have never been too impressed with the installations of the Berger vinyl stripes by those sign guys......... yet another reason I installed the stripes myself.
Greg
Never install the stripes out in the hot sun or I can almost be sure you will get plenty of bubbles. The paint should be cool to the touch to keep the water film from drying too quickly. Or you won't have a chance to squeege the air/water bubbles out before the vinyl stripes are "Stuck" into position.
Wade..... No Problem bud!! Actually I have never been too impressed with the installations of the Berger vinyl stripes by those sign guys......... yet another reason I installed the stripes myself.
Greg
Thread Starter
TECH Regular
Joined: Dec 2005
Posts: 400
Likes: 0
From: Down Under
Originally Posted by meissenation
Where abouts in MI you from? Just curious, bunch of us from my website are heading out to Woodward tonight. Was out there last night from 11 to 1am. 
Oh, i'll be there.. but then again.. i usually am
