Breathless Kit COMPLETE !!!!!!!!!!
#21
TECH Enthusiast
Originally Posted by old and good
i was meaning that it wuld have been better if the projectors wuld look simmilar, for example all round or square, like the corvette.
#22
12 Second Club
iTrader: (19)
Join Date: Nov 2005
Location: Dallas, TX/Orlando, FL
Posts: 786
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by LTSpeed
My sentiments exactly. For a T/A, all round would be hotttt....
hell yea x1034523973qrweiur83425723
If it was all round and HIDs w/ projectors I would buy it in a second!
#24
TECH Resident
iTrader: (12)
Join Date: Jul 2004
Location: Georgetown, IL 61846-1105
Posts: 987
Likes: 0
Received 1 Like
on
1 Post
I love my kit, I think most thing differently because it's a different look to the whole front end now.
Honestly if you look at the openings on the front of the TransAm, the RamAir inlets, and the turn signals as well as the other opening belot the signal is more of a rectangle I don't think it stands out as much as it's portrayed, but yet all round would look nice, or so we think. Wont know till it's done, or if it's ever done.
Honestly if you look at the openings on the front of the TransAm, the RamAir inlets, and the turn signals as well as the other opening belot the signal is more of a rectangle I don't think it stands out as much as it's portrayed, but yet all round would look nice, or so we think. Wont know till it's done, or if it's ever done.
#28
TECH Senior Member
iTrader: (2)
Originally Posted by 777
IMO the non-pop up conversion would only look good if someone came up with a kit or whatever to where the glass/plastic came all the way to the nose instead of leaving part of it open. Similar to the c6.
See here:
https://ls1tech.com/forums/showpost....3&postcount=94
So you vote for the extended headlight cover?
#33
TECH Resident
iTrader: (12)
Join Date: Jul 2004
Location: Georgetown, IL 61846-1105
Posts: 987
Likes: 0
Received 1 Like
on
1 Post
Yes they would look better with round projectors however. I like my kit, alot of people whine over the price, is it high yes? Until someone makes another kit, to be produced to the public, deal with it...Until there is competition they can get what they want out of them. Now even if they redesigned, or the orginal design used the round setup like a C6 and have the 3 lights, or even two. Then the price would be higher either for more parts for the 3, or let alone for more than likely using an HID setup with round projectors. So it would just be even more reason to complain about the price.
#34
TECH Addict
iTrader: (19)
Join Date: Mar 2006
Location: Owings, Md
Posts: 2,157
Likes: 0
Received 0 Likes
on
0 Posts
Is it just the pic or do your wheels stick way out of the wheel wells? it looks like you need a taller sidewall on those wheels. Im commenting on the wheels cause im not sure if i like the headlights or not... sorta makes the car look crosseyed
#35
You guys bitch about the price now, but you should take a look at what RX7,MR2 etc people have to shell out for flush headlights.
It will make the breathless kit very resonable if you compare them, but honestly they all are over priced.
The white TA is by far a awsome looking car and just looks so sexy!!!!!!!!!
It will make the breathless kit very resonable if you compare them, but honestly they all are over priced.
The white TA is by far a awsome looking car and just looks so sexy!!!!!!!!!
#36
TECH Senior Member
iTrader: (2)
Originally Posted by slick1851
You guys bitch about the price now, but you should take a look at what RX7,MR2 etc people have to shell out for flush headlights.
I think I'm putting around $700 or so into mine and it will use BMW projectors and HID bulbs. Should I sell it for $1500 to $2000? To me that sounds rediculous.
I bet if there was a competitor, Breathless would cut the price in half and still make a healthy profit. I just don't see the money in their kit. Maybe the lens they had made is the most expensive part?
#38
Originally Posted by JasonWW
Some of those kits use good projectors and better lenses as well. Still, I think $1K is a rip off.
I think I'm putting around $700 or so into mine and it will use BMW projectors and HID bulbs. Should I sell it for $1500 to $2000? To me that sounds rediculous.
I bet if there was a competitor, Breathless would cut the price in half and still make a healthy profit. I just don't see the money in their kit. Maybe the lens they had made is the most expensive part?
I think I'm putting around $700 or so into mine and it will use BMW projectors and HID bulbs. Should I sell it for $1500 to $2000? To me that sounds rediculous.
I bet if there was a competitor, Breathless would cut the price in half and still make a healthy profit. I just don't see the money in their kit. Maybe the lens they had made is the most expensive part?
Ive called them befor, they dont seem to freindly" so I doubt there price is going to go down or that they even care.
#39
TECH Apprentice
iTrader: (3)
Join Date: Jun 2005
Location: Kopavogur ,Iceland
Posts: 348
Likes: 0
Received 0 Likes
on
0 Posts
i think this culd be a realy cool kit if the clear cover wuld be smoked in the same color as the bodycolor. or atleast it wuld look great on black, red, blue and organe cars
#40
TECH Senior Member
iTrader: (2)
You could always use NiteShades on it, but you will wreck trying to drive at night.
Now if you had HID, then maybe the tinting would still allow enough light to go through to actually see with. Your right about the looks though. That's why I'm mostly going to paint mine and only leave enough lens showing for the light to go through, the rest will be painted black. I could even experiment with tinting mine a little, just to see how it effects the output in comparison to the cosmetics in the daytime. Maybe there is a special dark coating that will minimize light loss. I've seen that on driving lights.
http://www.tirerack.com/accessories/...blackmagic.jsp
Maybe I can figure out what they use.
Now if you had HID, then maybe the tinting would still allow enough light to go through to actually see with. Your right about the looks though. That's why I'm mostly going to paint mine and only leave enough lens showing for the light to go through, the rest will be painted black. I could even experiment with tinting mine a little, just to see how it effects the output in comparison to the cosmetics in the daytime. Maybe there is a special dark coating that will minimize light loss. I've seen that on driving lights.
http://www.tirerack.com/accessories/...blackmagic.jsp
Maybe I can figure out what they use.