LS1Silverado05

iTrader: (41)

Does the factory WS6 hood have any identifying marks or things about it? I ask because the hood on our 99 WS6 has a sticker inside the scoop when looking from under the hood (as though you were looking from the air filter's point of view) I cant remember the exact name, but It was polywheels or poly----- something sticker in there. Also, should there be insulation on the underside of the hood?...Or a gasket or anything at the opening in the rear of the Ram Air on the hood? Thanks.

Tainted2

should be some type of gm part number stamped onto or soemthing of the nature

RAMPANT

iTrader: (17)

For a brief time Polywheels made the GM hoods from what I understand, I remember seeing one in the engineering office there. I tried to get it as a spare, but no go.

They are located in Oakville Ontario and make a number of OEM parts.


Rampant

LS1Silverado05

iTrader: (41)

Ok right on. I mean. I KNOW its a WS6, but I was just curious is someone dumped the original hood or not. And its definately Polywheels perf. that is the sticker in there. Thanks guys.