Cme Re Makes?
The seams will be ground/sanded smooth, then polished to a mirror shine.
They're still on the drawing board, but they will be made.
*Please be patient, I'm not working on them for another week or so, I still have to buy/borrow an actual Valance to send off for the fiberglass molds, and the CME so I can take to the fab shop.
If anyone wants to "rent" a valnce/CME I'm game,
or I'll just buy one and sell it after the jig/molds are made.
~Joshua
They're still on the drawing board, but they will be made.
*Please be patient, I'm not working on them for another week or so, I still have to buy/borrow an actual Valance to send off for the fiberglass molds, and the CME so I can take to the fab shop.
If anyone wants to "rent" a valnce/CME I'm game,
or I'll just buy one and sell it after the jig/molds are made.~Joshua
Would you be willing to make a custom one for me?
I've sold 25 of the CME valances over the summer/fall and I planned on keeping one for myself but I ended up selling my personal one as well because it just didn't do it for me in stock form.
I've sold 25 of the CME valances over the summer/fall and I planned on keeping one for myself but I ended up selling my personal one as well because it just didn't do it for me in stock form.
Originally Posted by ProjectCamaro
Would you be willing to make a custom one for me?
I've sold 25 of the CME valances over the summer/fall and I planned on keeping one for myself but I ended up selling my personal one as well because it just didn't do it for me in stock form.
I've sold 25 of the CME valances over the summer/fall and I planned on keeping one for myself but I ended up selling my personal one as well because it just didn't do it for me in stock form.
Pm me or call, we'll chat. ~Joshua
do you have an idea or how much it'll cost? like 300 to 400? something really loose but around so we have an idea? at first i didnt like the CME's...then the fkkers started growing on me and now i want one, to many regular camaro ***'s around here 
Originally Posted by ~JOSHUA
Sure.
Pm me or call, we'll chat. ~Joshua
Pm me or call, we'll chat. ~Joshua
Will the tips have a rolled edge? I don't care for the stainless ones currently being made because it gets lost in the valence since it is just a thin stainless edge and not a rolled tip like the thick lips on the cast tips.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Rolled edge baby! 
"SLP clone," except highly polished and they wont split down the center divider like the factory cast part.
Price? I've heard some really high numbers on the few remaining pieces, but if any of you know me.... I'm not about the money.
There are some technical issues to sort out.. I could fill this page with all the varibles that have to be decided on.... I'll figure 'em out though...
"SLP clone," except highly polished and they wont split down the center divider like the factory cast part.Price? I've heard some really high numbers on the few remaining pieces, but if any of you know me.... I'm not about the money.
There are some technical issues to sort out.. I could fill this page with all the varibles that have to be decided on.... I'll figure 'em out though...
Originally Posted by -Freak-
I just watched a cme valance and dual tips go for $1100 not to long ago!!!!
if you make, it we will buy.
if you make, it we will buy.
Originally Posted by 98redM6
Urethane sucks. Fiberglass is better because it is easier to prep and paint.
Originally Posted by 3800RS
Bend both and let me know which is more durable. thats enough of a debate from me
Bending a painted part will just crack/spiderweb the paint.
Originally Posted by reject
at first i didnt like the CME's...then the fkkers started growing on me and now i want one, to many regular camaro ***'s around here
i disliked them very much....then they really grew on me, and i found out the were outa production 
Originally Posted by -Freak-
you sir will be a Hero of ls1tech.com once you release these.
Hopefully if he's still in the business of making the Corsa clone tips, I will be doing business with him soon...are you? lol
Thread Starter
TECH Junkie
Joined: Nov 2003
Posts: 3,265
Likes: 1
From: CHITOWN
Thank you so much for making these! Im a broke student and 1k its a huge rip off!
I see those Custom Imported JDM Front bumpers for higher end cars for around 1k and under! And thats a whole front bumper!
Josh is going to make a killing if these are very fair priced
I see those Custom Imported JDM Front bumpers for higher end cars for around 1k and under! And thats a whole front bumper!
Josh is going to make a killing if these are very fair priced