Halloran

iTrader: (7)

My passenger side window lift motor took a crap so I ordered a new one. I took my door panel off today and it looked like the lift motor was rivetted in! I have a 1998 T/A...is there a way to take out the lift motor w/o having to bust the rivets?

Thanks!

BIG_MIKE2005

iTrader: (116)

I heard that you have to drill the old rivets out & then rivet in the new motor. Should be able to use some simple pop rivets.

For some reason I wanna say there is a write up somewhere.

Magnet

iTrader: (36)

jsut did mine yesterday took about 2-2.5 hours because i was a noob, but HERE is the write-up i used it was very useful

BigRedZag

Same write-up I used. I'm about a newb when it comes to this kind of stuff and it took me like 40mins to do my drivers side one. I had the motor from Autozone for like 3 months before I bit the bullet and did it. Just follow those instructions and it's easy.

Dan

iTrader: (1)

Ditto, Used the same write up..In 4hrs I replaced the window motor & Fixed the infamous cracks in the door panels