Im looking into getting the same ones. 
Corsa's are on :)
Corsa's are on :) So much better I lovem. I think the left 1 might be a little too far to the left if anything ill take that pipe off cut some off the end and put it back on.
Yeah...the clones just don't compare.
Is that a complete catback or just the tips? If it's a catback, maybe the pipe just isn't all the way in? Double check before getting the saw out. And then don't forget to measure the distance between the license plate and the tip to make sure they are even on both sides...but that's common sense
Is that a complete catback or just the tips? If it's a catback, maybe the pipe just isn't all the way in? Double check before getting the saw out. And then don't forget to measure the distance between the license plate and the tip to make sure they are even on both sides...but that's common sense
Originally Posted by MannyZ28
Yeah...the clones just don't compare.
Is that a complete catback or just the tips? If it's a catback, maybe the pipe just isn't all the way in? Double check before getting the saw out. And then don't forget to measure the distance between the license plate and the tip to make sure they are even on both sides...but that's common sense
Is that a complete catback or just the tips? If it's a catback, maybe the pipe just isn't all the way in? Double check before getting the saw out. And then don't forget to measure the distance between the license plate and the tip to make sure they are even on both sides...but that's common sense
. If it is off the slightest bit most people wont even be able to tell to I might just leave it alone I got everything else fitting really well and that pass side pipe is on tight as hell.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by unSStoppable
yea those look so nice, i wouldnt cut into either until you are positive everything is all lined up.
I fixed it its perfect now . I measure from the license plate and put tape marks on the bumper. Then I loosed the nut at the mount on the body on the over axle pipe and had my dad push the whole muffler and all over and I tightened it back up and now its perfect. Ill go get a pic.
. I measure from the license plate and put tape marks on the bumper. Then I loosed the nut at the mount on the body on the over axle pipe and had my dad push the whole muffler and all over and I tightened it back up and now its perfect. Ill go get a pic. 
"About" and "Exactly" don't go well together in the same sentence....let alone right next to each other.Looks ***** man!
Ever considered some stainless steel Camaro inserts? I just put mine on....looks great, way better than those mirrored plexiglas ones I had before!
Originally Posted by MannyZ28
"About" and "Exactly" don't go well together in the same sentence....let alone right next to each other.Looks ***** man!
Ever considered some stainless steel Camaro inserts? I just put mine on....looks great, way better than those mirrored plexiglas ones I had before!
Well its not exactly 13 its 12 and 13/16 to both sides haha. Was a pretty ignorant statement I guess lol.
I thought about those inserts too but still thinkin on it.
