door panel question
08-12-2007, 10:04 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Aug 2004
Location: Omaha Nebraska
Posts: 41
Likes: 0
Received 0 Likes
on
0 Posts
door panel question Has anyone ever taken apart the door panel? What I mean is, has anyone ever tried to remove the arm rest off the panel, either by cutting, or melting the plastic parts off the back of it. I am wanting to put a small indention in that part, with out cutting the arm rest all up, and was wondering if it is possible to do. I can get some pictures of what I am talking about if need be.
08-13-2007, 12:14 AM
#2
Copy & Paste Moderator
My post from another thread may help you:
https://ls1tech.com/forums/showpost....3&postcount=15
It contains a link to a write-up I followed and a description of my deviation.
https://ls1tech.com/forums/showpost....3&postcount=15
It contains a link to a write-up I followed and a description of my deviation.
