Replacing top dash section
Replacing top dash section I have a new piece for the top part of my dash (the part with the defogger vent) that always cracks. Does anybody know how to get this piece installed? Do I have to pull of the entire dash or is there a better way? Thanks.
It's super easy. I just did mine this past Sunday in about 10 minutes. Just pull up the old one and pull off the side pillar pieces and put the new one down and put the side pieces back on. There are 4-5 clips that the dash clips into and a few places towards the windshield where it just velcro's down. You may have to dig out some of the old plastic from the clips but other than that it's really simple!
I remember that a while back I decided to fix the one on the LT1, it had a crack almost at the middle, made it look like a two piece dash. I removed the pillar trim, and I was working my way to get the complete piece with the crack off.... everything seemed to be going well..... I was almost done...... and then................ everything broke!!!!! Just like that, the whole piece was roasted and it broke in many pieces!!!!! I ended up with a puzzle as a dash!! hehehehe
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
